Could Jif Trailer Winch Fit Mounting Holes that are 4 inches Apart
Updated 07/15/2020 | Published 07/14/2020
Question:
I have three mounting holes on my trailer, each two inches apart. The middle one has an inch flex-space. Will this winch fit on my trailer?
asked by: Gregg S
0
Expert Reply:
The distance from the front hole to the beginning of the slotted mounting hole on the bottom of the Jif winch part # 315-W1800D is 3.5 inches and then the distance to the rear of the slotted hole is 5 inches so you'd be able to line up two of your winch mounting holes at least to your current mount setup.
expert reply by:
Jameson C
0
Continue Researching
- Shop: Demco Hydraulic Brake Actuator - Drum - Zinc - 2" Ball - 7,000 lbs
- Shop: Replacement Master Cylinder Assembly for Dexter Model 60 and Aero 7500 Brake Actuators - Drum
- Shop: etrailer Hydraulic Trailer Brakes - Uni-Servo - 10" - Left/Right - 3.5K
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Article: Hand Winches
- Video: Hands-On with the Dutton-Lainson Hand Winch-DL15303
- Shop: Dutton-Lainson Hand Winch - TUFFPLATE Finish - Single Speed - 1,400 lbs
- Q&A: Choosing a Lightweight Winch that is Rated to Pull 1200 lbs
- Q&A: Best Replacement for a Shelby Hand Winch 5405
- Q&A: Part Number for Dutton-Lainson Hand Winch
- Shop: Hydraulic Trailer Brake - Uni-Servo - 10" - Left Hand - 3,500 lbs
- Shop: Demco Hydraulic Brake Actuator w/ Electric Lockout - Disc - Zinc - 2" Ball - 7,000 lbs
- Q&A: Solution for Needing Replacement Shock for Atwood Actuator
- Q&A: Quality of Replacement Master Cylinder Assembly for Titan Model 60 and Aero 7500 Brake Actuator
- Q&A: Replacement for Atwood Surge Brake Actuator 85778
- Search Results: t1242600
- Search Results: atwood 85736 master cylinder
- Video: In-Depth Review of the Replacement Shock for Dexter Model 6 and 10 Brake Actuators
- Shop: Replacement Shock for Dexter Model 6 and 10 Brake Actuators
- Video: Hands-On with the Reverse Lockout Solenoid for Demco Hydraulic Brake Actuators
- Video: An In-Depth Look at the Reverse Lockout Solenoid for Demco Hydraulic Brake Actuators
- Video: Feature Breakdown: Reverse Lockout Solenoid Kit for Demco Hydraulic Brake Actuators
- Video: Review of the Reverse Lockout Solenoid for Demco Hydraulic Brake Actuators
- Video: Detailed Breakdown of the 10" X 2-1/4" Hydraulic Brake Shoe/Lining (One Wheel)