What is Size of Fulton Winch part # F142102

Question

Question:

What is the physical size of the winch, LxWxH?

asked by: Mark

0

Expert Reply:

The height of the Fulton winch part # F142102 is 6 inches, the width is 5-1/4 inches without the handle and then with the handle is 10 inches. The length front to back is 7 inches.

expert reply by: Jameson C

0

Answer 1

I did some research into the different single speed winches you referenced of #F142102, #F142007, and #348776. The minimal mounting bolt distance (center on center) that work with all 3 of these is 2-1/4 inches and you will want to use 3/8 inch grade…

view full answer...

Answer 2

Hello Mark, The width of the frame for the Fulton Single Speed Trailer Winch #F142102 is 3 1/2". I included an image of where he measures it in the one shot video. I also attached the one shot video I found it in. I have helped people get…

view full answer...

Answer 3

Hey Scott, We do have a trailer winch with the 3-1/2" wide measurement you need to go with the CE Smith Bow Roller Bracket #CE31005PG. What you can use with this is the Fulton Single Speed Trailer Winch #F142102. This has an 1,100 lb capacity…

view full answer...

Answer 4

I went out to our warehouse to take a look at the Dutton-Lainson Hand Winch - 1,100 Pounds #DL15103 referenced in your question. I was able to take the measurements you are needing and have attached an image with these dimensions labeled that you can…

view full answer...

Answer 5

The Fulton Single Speed Trailer Winch part #F142102 uses a standard winch mounting pattern which I have attached a photo of for you. If your winch mounting pattern does not match this then your would be best off to just re-drill as most boat trailer…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

What is Size of Fulton Winch part # F142102

Featured Help Information

Miscellaneous Media

Continue Researching