Distance From Center of Hitch Pin To Closest Edge of Carrier etrailer Motorcycle Carrier
Updated 04/20/2020 | Published 04/15/2020
Products Featured in This Question
Question:
Hello, Im looking to pull a trailer and use a double hitch adapter to allow for the use of a dirt bike carrier e98873 as well. However Im looking to make sure the trailer will have enough room during turns with the carrier on the back. In order to determine this, I need to know a few more dimensions of the e98873 motorcycle carrier. I've attached a photo from a similar carrier with the dimensions I will need to determine clearance. In short, i need to know the distance from the pin hole to the carrier 15.5inch on the black widow model in the picture. Thanks,
asked by: Jon C
Expert Reply:
In regards to the etrailer Motorcycle Carrier part # e98873, it actually has 3 hitch pin holes. The hole that gives the most distance from the center of the hitch pin hole to the closest part of the carrier is 7-5/16".
The Ultra-Fab carrier # UF48-979033 has a distance from center of hitch pin hole to closest edge of carrier: 15-1/2". this one might work better for you.
