What Does the Leveling Knob Do on a Tekonsha Voyager Trailer Brake Controller
Updated 07/09/2012 | Published 07/06/2012
Question:
what is the leveling knob for?
asked by: Ron N
0
Expert Reply:
The leveling knob adjusts the components inside so that they are level even if the controller is mounted at an angle. This is so the brake controller can sense deceleration properly and apply the brakes accordingly on the trailer. If not level the control may apply too much or too little power to the trailer brakes.
expert reply by:
Michael H
0
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Parts Needed To Add Electric Drum Brakes To A Trailer
- Q&A: Can Electric Over Hydraulic Brake Actuator Be Fully Submerged
- Q&A: Replacing 6-Way on Trailer With 7-Way Connector
- Q&A: Will the HydraStar Electric Over Hydraulic Actuator Part # HS381-8067 Work for Me
- Q&A: Differences Between Marine and Standard Hydrastar Actuators
- Q&A: Parts Needed To Replace Surge Coupler For Disc Brakes With Electric Over Hydraulic
- Q&A: Adding Electric Over Hydraulic Disc Brakes to Boat Trailer