Brake Controller Install Harness for 2007 Holiday Rambler Vacationer for Prodigy P3

Question

Question:

I have a 2007 Holiday Rambler Vacationer DP 34. Is there a Tekonsha Plug-In Wiring Adapter for my coach, or do I need to get a pig tail and wire it myself? Thank you

asked by: Matthew G

0

Expert Reply:

Your 2007 Holiday Rambler Vacationer DP 34 is built on a Ford F-53 chassis so there is a brake controller install connector that you can use for a quick plug and play install with the Prodigy P3 part # 90195 you mentioned. All you'd need is the part # 3035-P and you'd be set!

I attached a picture for where you'll find the connector on your RV.

expert reply by: Jameson C

0

click to enlarge

Answer 1

Yes, one of the few consistencies in trailer-related wiring is that all trailer brake controllers such as the Prodigy P3 #90195 use the same 4 wire colors for specific functions. The controller's Black wire connects to the vehicle battery via a…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Hello Mel, great question! Yes, the Torklift tie downs part #TL66FV will fit your 2006 GMC Sierra 2500HD crew cab with the 8 foot bed, provided your truck does not have running boards or cab length boards that extend under the bed, and you are not…

view full answer...

Answer 5

Hey William, thank you so much for all of the information! To replace your axles, I recommend the Trailer Axle w/ Electric Brakes item #e73SR. This is a 6,000 lbs axle that come ready to install with pre-greased hubs and electric brake assemblies.…

view full answer...

Answer 6

Hey Frank, thanks for reaching out! What Dexter Axle means by this is that you want the grease zerk fitting from the wet bolts in the Dexter E-Z Flex Suspension Kit #K71-653-00 to face the outside of the trailer, rather than under the trailer. I see…

view full answer...

Answer 7

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 8

Hi Austin, I can help you determine the right replacement double-eye leaf springs for your 2018 Jayco trailer, though we don't have any way of knowing what specific ones you need. It's pretty easy though, as all you need to do is measure your…

view full answer...

Answer 9

It sounds like you are looking for a u bolt kit for a 3,500 lbs axle. The 3-Leaf Double-Eye Spring for 4,000-lb Trailer Axles - 25-1/4" Long item #e57SR will work great for a tandem axle suspension system. For your ubolt kit you're going to…

view full answer...

Answer 10

Thank you for providing that information. Leaf springs like the ones you have now typically match the axle capacity on your trailer. Although adding leaf springs with a slightly higher capacity won't hurt, it also is not necessary. Based on the…

view full answer...

Answer 11

Hello Dave, thanks for reaching out. Typically broken leaf springs are the result of an overloaded trailer. One thing you could try here is going with higher rated leaf springs. It could be the weight of your camper is right at the max limit for your…

view full answer...

Answer 12

Hey Jason, it's pretty common for replacement leaf springs to be slightly shorter than what they replace as springs tend to stretch/flatten overtime as they wear out so while you are on the right track 3/4 of an inch is a bit too much of a…

view full answer...

Brake Controller Install Harness for 2007 Holiday Rambler Vacationer for Prodigy P3

Continue Researching