Trailer Lights Go Out When Plugged into 2007 Hyundai Entourage
Updated 06/30/2009 | Published 06/29/2009
Products Featured in This Question
Question:
WHEN I PLUG THE TRAILER IN THE LIGHTS GO OUT, IF I PLUG THE TRAILER IN WITH OUT PLUGING THE CAR LIGHTS TO THE T- CONNECTOR THEY WILL WORK. PLUG THEM ALL IN AND LIGHT ON CAR GO OUT. NO LIGHTS ON TRAILER.
asked by: JAMES W
Expert Reply:
It sounds like you have to much draw on the system, if you are not blowing fuses, for the car to handle the trailer lights with this wiring harness. If the connector is working properly without the vehicle lights plugged in the vehicle is not designed to handle the draw placed on it with the trailer hooked up. In this case you will need a powered wiring harness, item number 118410 for your 2007 Hyundai Entourage. This harness will supply power to the brake lights on the trailer separate from the brake lights on the car so the system can function with the trailer plugged in. One wire will need to be ran to the battery via a 10 amp fuse.
To view the installation instructions, click on the provided link.
