Replacement High/Low Beam Headlights for a Chevrolet Kodiak
Published 02/12/2020
Question:
this vehicle has as standard 4four 4x6 headlights. the question being does one replace all four of the stock units. if so does on remove one wire for the hi-beam only bucket?
asked by: Paul
Expert Reply:
The Chevrolet Kodiak has two separate headlight bulbs/housings, one for high beams and one for low beams. If you wanted to replace both the high and low beams then you would need two sets of the Vision X Headlight Conversion Kit part # VX-46. The Vision X Headlight Conversion Kit will work as both a high beam and as a low-beam. You don't need to remove any wires, it's all plug and play. The high beam plug on the vehicle will have a different prong configuration than the low beam plug but the connectors are the same shape so you don't need to worry about which is which when installing the Vision X Headlight Conversion Kit.
Please note, you will also need bulbs for the above and I recommend the Vision X 9007 Halogen Headlight Bulbs part # VX-D9007.
