Torque Spec for Turret Bolts On a Reese Sidewinder Pin Box
Updated 10/21/2019 | Published 10/20/2019
Question:
I lost the information that came with the Sidewinder Pin Box I bought from yo earlier this summer. Could you tell me what the torque specs are for all bolts but most important to me right now the 4 bolts on the rotating turret? Also would it be possible to get another instruction sheet? It had everything Ill ever need on it. Thanks
asked by: Mike H
Helpful Expert Reply:
In regards to the Sidewinder 5th Wheel King Pin with Rotating Turret part # RP34FR, the four bolts that hold the turret to the arm will need to be torqued using a cross pattern to 150 ft lbs and then backed off and re-tightened to 45 ft lbs. I have attached a copy of the installation instructions to this answer for you as well.
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Will Reese 16k Fifth Wheel Replace 15k Pro Series Fifth Wheel Hitch
- Q&A: Best Replacement Head for a Pro Series 15k Fifth Wheel Hitch Recommendation
- Q&A: Which Hitch is Better for Use with a Sidewinder a Reese Select Series 16K or Curt E16
- Q&A: Can a 15k Reese or Pro Series Fifth Wheel Hitch be Upgraded to a 20k Hitch
- Video: Reese Fifth Wheel - Fixed Fifth Wheel - RP30047 Review
- Q&A: Where Does Rubber Bumper Install in Reese 16k Fifth Wheel Hitch
- Q&A: How Do Rubber Bumpers of Reese 30047 Fifth Wheel Hitch Install
- Q&A: How Many Rubber Bumpers are Normally on a 5th Wheel Trailer Hitch Head