Connecting Wires of ZCI Trailer Wiring Kit to 2013 Audi A6
Updated 09/05/2019 | Published 09/04/2019
Question:
Trying to determine which wire to connect each sensor to on the Tekonsha 119250.
asked by: Galen S
0
Expert Reply:
Your 2013 Audi A6 has trailer wiring circuits that are combined what use pulse width modulation on the same wire.
So according to Tekonsha when you install the # 119250KIT you need to attach the yellow wire of the kit to the brake/tail/left turn wire on the vehicle and the green to the brake/tail/right turn wire. The brown and red wires of the kit are not used.
expert reply by:
Jameson C
0
