Will the Curt T-Connector or T-One Disable Park Sensor Warning on a 2016 Ram ProMaster City
Updated 08/14/2019 | Published 08/13/2019
Products Featured in This Question
Question:
Will this wiring harness deactivate the packup sensors on the PMC? I plan on using a motorcycle carrier rather than a trailer and am looking to either put trailer lighting on the carrier or find some way to use the wiring harness to bypass the backup sensors. 2016 Ram Promaster City Tradesman SLT
asked by: Brian
Expert Reply:
The only trailer wiring harness I am aware of that disables the park sensor warning message on a Ram ProMaster City is the Mopar Trailer Tow Wiring Harness. The T-One Vehicle Wiring Harness part # 118719 and the Curt T-Connector Vehicle Wiring Harness part # C56270 will not disable the park sensor warning message so if you use either of these you may get an in-dash error message while in reverse with a trailer attached. This will not have an effect on anything but it can be rather annoying. That said, the park sensor warning feature may be able to be disabled permanently but you would need to reach out to the manufacturer to see if this is possible as I was not able to find anything about this online.
