Trailer Valet Recommendation for Trailer to Help Maneuver Into Parking Spot
Updated 07/17/2019 | Published 07/16/2019 >
Products Featured in This Question
Question:
I have a 1200 lb boat including trailer. Due to narrow city street I need to winch it up a modest grade backwards while hand guiding the trailer younger to garage lip. That would be easy for many winches but I also need to now lower the trailer boat combo into the garage as there is a grade down as well! For the winch I am thinking to mount a socket for a low post almost to the ground. which the trailer. Needs to pass over. Weird isn’t it? The garage lip’s ramp down is steep but short..like launching a boat. if this is hard to visualize can I send you a drawing pdf?
asked by: Richard E
Expert Reply:
Would a dolly possibly be easier to maneuver the trailer? Sounds like what you are really wanting to do is hand guide a trailer into a parking spot and were wanting a winch to help control it and guide it. For that type of application the Trailer Valet XL's like the part # TVXL25 for trailers with 2-5/16 inch balls or the # TVXL2 for trailers with 2 inch balls is the better solution.
These have a handle and hand crank which make them very easy to move trailers around and can also do inclines like what you can see in the attached review video link.
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: trailer valet
- Shop: Brake Controller
- Search Results: trailer valet trailer dolly
- Search Results: trailer valet xl pro
- Q&A: Will a Front Hitch Help My Ability to Maneuever a Trailer In Tight Spaces
- Q&A: Will Trailer Valet Trailer Dolly Move a 6,000 Pound Trailer at 90 Degrees Up Hill
- Q&A: Do I Need to Disengage the Brakes on my Trailer When Using the Trailer Valet XL
- Shop: Curt Rebellion XD Shock Absorbing Adjustable Ball Mount w/ 2" and 2-5/16" Balls - 15K
- Shop: Front Mount Hitch
- Q&A: Dolly Recommendation for Moving Trailer That Attaches to Coupler
- Shop: Redarc Tow-Pro Liberty Brake Controller - Dash Knob - Up to 2 Axles - Proportional
- Shop: Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2"
- Shop: Trailer Valet XL Mounting Bracket
- Shop: Trailer Valet 5X Swivel Jack and Trailer Mover - Topwind - 15" Lift - 5,000 lbs
- Q&A: Can I Operate the Trailer Valet XL Trailer Dolly on a Decline?
- Q&A: Winch Recommendation to Pull Boat Trailer Up Hill
- Q&A: How to Winch a Boat and Trailer Down a 60 Foot Hill with 35 Degree Slope
- Video: Manufacturer Discussion with Trailer Valet
- Video: In-Depth Review of the Flair-It PEXLock Straight Valve Stop Fitting
- Video: Comprehensive Review: Flair-It PEX Straight Valve Stop Fitting
- Shop: Universal Mounting Plate for Bulldog Winch Alpha Series Off-Road Winches - 12,500 lbs to 15,000 lbs
- Search Results: shurflo
- Search Results: water valve
- Search Results: trailer jack
- Video: A Closer Look at the Trailer Valet XL Mounting Bracket
- Shop: Flair-It PEXLock Straight Valve Stop Fitting - 1/2" Barb x 1/2" Barb
