How To Find the Correct Replacement for a Reese 10K Revolution Pin Box
Updated 07/16/2019 | Published 07/15/2019
Question:
I purchased a rebuild kit from you. The removal of my turret pin from the hitch sleeve was extremely difficult....a lot of binding. Reinstalling the pin into the new teflon sleeve has been very challenging also. Once installed, the hitch will not rotate. I suspect the pin may be bent. Is it possible to purchase a replacement pin box or do I have to purchase a whole new hitch?
asked by: Al B
Expert Reply:
The pin on the Reese 10K Revolution is part of the upper turret which for this particular pin box is not a replaceable part. Therefore, the only option you have at this point would be a new pin box but this also gives you an opportunity to upgrade to a cushioned option as well which makes for a better overall ride. If you can provide me with the model number of your pin box or the model number of the wing set on your trailer, I can make sure you get the correct replacement. Otherwise, you will need to measure the hole spacing using the attached help article.
If you have a Lippert 1621 model which is the most common then the 5th Airborne Premium 5th Wheel Air Ride King Pin w/ Sidewinder part # RP61422 would be the correct replacement.
