License Plate Screws to Use with Fastener Caps for License Plates Diamond Bling

Updated 05/22/2019 | Published 05/21/2019

Products Featured in This Question

Fastener Caps for License Plates and License Plate Frames - Diamond Bling - Qty 4

(2)

$9.85

Self-Tapping Fasteners for License Plates and License Plate Frames - Stainless Steel - Qty 4

(8)

$6.28

Question:

What screws would you recommend using with the CR82730 covers? I bought these covers once before but the screws that hold the license frame which came with the car are too big, so the covers do not fit over them. I also bought the Cruiser Diamondesque Lic Frame - Chrome/clear and thought the Diamonesque screw covers would be a nice compliment to the frame.

asked by: Della

Expert Reply:

We do have the Mounting Hardware and Snap Caps # CR80430 which is a compatible size with the fastener caps you mentioned.

The Cruiser Bling Fastener Caps # CR82730 that you referenced were designed to be a universal as possible but they require that the screw heads be less than 7/16 inches in diameter. Basically the caps that are included install behind the screw head and then the cover attaches to the caps which provides a friction fit.

expert reply by: Jameson C