Troubleshooting No Power to iRV Stereo 35 on 2019 Rockwood Windjammer 3008V  

Question:

Expert Reply:

The first thing to check is to make sure that your iRV RV Stereo # 292-101809 is actually getting power. Even if the fuse looks good there may be a problem with the wiring somewhere which is causing the issue you are seeing.

Try taking a circuit tester like part # PTW2992 and testing the yellow power wire that has the 15A fuse on it. Test the wire before the fuse to see if power is getting to the fuse. If there is power to the fuse then test the wire after the fuse. If there is power still present then the connector may be damaged or your stereo unit may need to be replaced but if there isn't power after the fuse then the fuse is bad somehow and needs to be replaced.

If you don't even see power before the fuse then you are going to need to trace that power wire back to it's source and replace any places where it is damaged.

expert reply by: Jon G

0

click to enlarge

click to enlarge

Paul

6/5/2020

Our iRV 35 radio in a 2019 Rockwood Windjammer worked great last year, however this spring has severe static. Any suggestions?

Chris R.

6/9/2020

I would try looking at the back of the unit to see if the antenna input is still securely attached - this may have come loose at some point.

Paul

6/9/2020

@ChrisR Thanks Chris i have done that, and the wire was in place ok. Have placed the radio back in and still has static.

Paul

6/12/2020

@ChrisR Hi ChrisR we did this and it didn't work Paul

Chris R.

6/12/2020

@Paul Thanks for the update. The only other thing I can think to try is to actually reset the stereo. You can do this by simply disconnecting it from power for a few minutes and hooking it back up (you may have even done this when checking the antenna connection). If it doesn't or didn't help, there's likely an internal issue that may require a full replacement.

See All (4) Replies to Paul ∨

Margrit W.

7/6/2020

No power to TV

Chris R.

7/10/2020

Have you tested to make sure you're getting sufficient power coming to the TV? This is a pretty vague issue so there could be a number of things causing this, including a bad power source, a loose wire connection at the back of the TV, an internal issue, etc.