Replacement Tarp Recommendation for 2014 Chevy Silverado 1500 6 1/2 ft bed With Extang Trifecta

Question

Question:

I have a 2014 Silverado with the 6 ft 6 inches bed. What model tonneau cover do I need for a replacement? The cover I have that’s ripped is a Trifecta 2.0 by extang. Thank you!

asked by: Matt

0

Expert Reply:

The replacement tarp you are in need of is the part # EX94450-20 since the Extang Trifecta 2.0 you have on your 2014 Chevy Silverado 1500 6-1/2 foot bed is the part # EX94450. This only fits the 2.0 versions of the Trifecta.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The correct replacement tarp for your Extang Trifecta on your 2014 Chevy Silverado 1500 short bed would be the part #EX94450-20. This is the same version tarp as what you have currently. When you said you need replacement knuckles it sounds like you…

view full answer...

Answer 2

It will be difficult to match up a replacement tarp for the Extang Trifecta tonneau cover on your 2015 Silverado 1500 6-1/4' bed without a serial number. If you have Extang Trifecta Signature 2.0 Soft Tonneau Cover - Folding CANVAS #EX94450 then…

view full answer...

Answer 3

Good morning Michael I can definitely point you in the right direction. There are a few different Extang covers that fit the 2018 GMC Sierra 1500 with the 6.5' bed. Generally, we like to get a model number or serial number from the cover which we…

view full answer...

Answer 4

Since your 2018 GMC Sierra 1500 6-1/2 foot bed has the #EX94450 the correct replacement tarp to part #EX94450-20.

view full answer...

Answer 5

With the dimensions you gave it sounds like you have a 6-1/2 foot bed on your 2015 Chevy Silverado 1500, and we do have replacement tarps for the Trifecta 2.0. There are two different versions of the Trifecta 2.0, the standard with a vinyl cover and…

view full answer...

Answer 6

I believe you meant to say you have an Extang Trifecta on the 2017 Chevy Silverado 1500 6-1/2 foot bed. It sounds like you have the Extang Trifecta Signature 2.0 Soft Tonneau Cover part #EX94450 and you were missing a digit from the question. The…

view full answer...

Answer 7

If you have the Extang Trifecta 2.0 Soft Tonneau Cover part #EX92450 which is a fit for a 2017 Chevrolet Silverado 1500 with 6-1/2' bed then you need the Replacement Tarp for Extang Trifecta 2.0 Soft Tonneau Cover part #EX93450-20. If you have…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...

Answer 12

Hey Mike, thanks for reaching out! For your application you'll want to go with the Quad-Fold BAKFlip G2 Hard Tonneau Cover #BAK26305 on your 2008 Ford Ranger. The etrailer Hard Tonneau Cover #e23DR actually doesn't fit your Ranger and we…

view full answer...

Replacement Tarp Recommendation for 2014 Chevy Silverado 1500 6 1/2 ft bed With Extang Trifecta

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching