What is the Width of the Bulldog Gooseneck-to-5th-Wheel Trailer Coupler Adapter # BD0289650300
Updated 09/04/2018 | Published 09/02/2018
Products Featured in This Question
Question:
I have had someone still my gooseneck coupler from my trailer. Old trailer has a 4 in down outer tube. In side is about 3.5 in will this adapter coupler fit inside the 4 in down tube. Thanks,
asked by: Kevin R
Expert Reply:
The inside width of the Bulldog Gooseneck-to-5th-Wheel Trailer Coupler Adapter # BD0289650300 is 3-7/16" while the outside width is 4". If the inside width of your outer tube is about 3-1/2" then this coupler adapter won't fit.
All of our other square inner tubes have the same 4" outer diameter. You may need to swap out your whole coupler for an option like part # BD0289590300 which is the whole adapter; inside and outside tubes.
You can lock the king pin with part # e98896 and the inner tube with part # BLTL-51-40D for security.
Product Page this Question was Asked From
Bulldog Gooseneck-to-5th-Wheel Trailer Coupler Adapter - Inner Tube - Square - 30,000 lbs
- 5th Wheel Gooseneck Adapter
- Adapts Trailer
- Gooseneck Trailer to 5th Wheel Hitch
- No Extra Clearance
- 30000 lbs
- Replaces Inner Tube
- Not Shock Absorbing
- Bulldog
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
- Q&A: Gooseneck Hitch Recommendation for Peterbilt Single Axle Semi Trailer
- Q&A: Is There Demco Recon that Fits Flat Bed with Ball that is 1 inch Below Deck Surface
- Article: Gooseneck to 5th Wheel Adapters
- Q&A: Can a 5th Wheel King Pin Adapter be Installed on a Big Tex 22GN Gooseneck Trailer
- Q&A: Gooseneck To Fifth Wheel Adapter For A Big Tex Gooseneck Trailer
- Q&A: Does Head of Fifth Wheel Hitch Need to Lock Out When Using Gooseneck to 5th Wheel Adapter
- Q&A: Adapter Solution to Convert Gooseneck Trailer to Fifth Wheel King Pin
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Performance Chips and Modules
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer