Wiring the Remote for a Superwinch LT2000
Published 08/27/2018
Question:
Hi, just bought a superwinch lt 2000 and the wire are not connected in the remote, its the push button style with 8 srews. Where do all the 4 wire connect? Thank you
asked by: Stephan
Expert Reply:
I am not exactly sure which remote you are referring to but I have attached a wiring diagram of the Superwinch LT2000 for both the rocker switch (black) and handheld remote (yellow/orange) options for you. If this is not the switch you are referring to then please send me a photo and I would be happy to help identify it.
If you have the handheld remote (yellow/orange) with four wires which I believe you do then one red wire goes to the positive battery terminal, the other red wire goes to the red wire on the winch, one black wire goes to the negative battery terminal and the other black wire goes to the black wire on the winch.
If you have the rocker switch (black) with three wires then the red wire goes to the ignition switch, the black wire goes to the black wire on the control box, and the green wire goes to the green wire on the control box.
