Do I Need to Upgrade the Spring Bars on my Weight Distribution System
Updated 08/21/2018 | Published 08/20/2018 >
Question:
my camper is 31 ft. long. weighs 6700 lbs dry weight. my bars are 600-800. should i not be using a 1000 lb. bars
asked by: Cindy
Helpful Expert Reply:
The weight capacity of the spring bars on your weight distribution system will need to exceed the loaded ready to tow tongue weight of the trailer in addition to any weight stored behind the rear axle of the tow vehicle. The average tongue weight of a trailer is 10-15% of the gross trailer weight (GTW) which puts you at around 670 - 1,005 lbs dry. Therefore, the 600-800 lb spring bars may be rated a bit too low. If you have the Strait-Line Weight Distribution System then you can use the Replacement Trunnion Spring Bar part # RP66009 which is rated for 600 - 1,200 lbs.
Continue Researching
- Shop: Spare Tire Cover
- Q&A: Is the 1,200LBReese Dual Cam II Weight Distribution System To Much For a 8,900LB Camper Dry Weight?
- Q&A: Trying To Decide Between Reese Dual Cam II And Reese Strait Line
- Q&A: Replacement Spring Bar for Reese Dual Cam II System to Increase Tongue Weight Range 600-1,200 lb
- Q&A: Were Cams of Reese Dual Cam III Upgraded from Previous Version
- Q&A: Comparing Reese Strait Line And Dual Cam II Weight Distribution Hitches
- Search Results: 58167
- Search Results: reese spring bars
- Search Results: rp26002
- Search Results: rp66084
- Search Results: rp66083
- Q&A: Replacement Spring Bars for a Reese Weight Distribution System
- Q&A: Will Reese Replacement Weight Distribution Head # 58167 Work with My Existing 1200 lb Trunnion Bars?
- Shop: Blue Ox Hitch Receiver Immobilizer II - 2" Hitches
- Search Results: bx88224
- Article: Trailer Wiring Diagrams
- Search Results: trailer hitch
- Shop: Trailer Hitch
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: How to Choose a Trailer Brake Controller
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Article: How to Measure for Trailer Hitch Drop
- Shop: etrailer Anti-Rattle Hitch Collar for 2" Hitch Receivers
- Shop: Suspension Enhancement
- Video: Redarc Tow-Pro Liberty Brake Controller Review RED24FR
- Shop: Brake Controller
- Article: 5 Things to Know About Weight Distribution Hitches
- Shop: Power Mountain Tallboy Off-Road Bottle Jack - 8-1/2" to 37-3/4" Lift - 6 Tons