Troubleshooting Tekonsha Voyager that Won't Level Show Level on LED
Published 08/15/2018
Question:
The controller is level side by side. I get braking action but it is jerking back an fourth when I tap or apply the brake. I am afraid if I apply the brakes firmly it is going to lockup the trailer when on the freeway. I believe the power side is working but I just can't get the controller to level per the directions which makes me believe that something is wrong with the controller and maybe unsafe.
asked by: Daniel E
Expert Reply:
How is the braking action? Does it seem to work okay? Is the controller level side to side when you use the level adjustment? Typically that's the only reason the manual level knob of the # 39510 won't show that it's level.
Continue Researching
- Q&A: Parts Needed To Add Electric Drum Brakes To A Trailer
- Q&A: Can Electric Over Hydraulic Brake Actuator Be Fully Submerged
- Q&A: Replacing 6-Way on Trailer With 7-Way Connector
- Q&A: Differences Between Marine and Standard Hydrastar Actuators
- Q&A: Recommended Actuator and Wiring for Boat Trailer Upgrade From Surge Brakes
- Q&A: Parts Needed To Replace Surge Coupler For Disc Brakes With Electric Over Hydraulic
- Q&A: Converting Surge Brakes to Electric Over Hydraulic on a Tandem Axle Boat Trailer
Daniel R.
8/15/2018
The controller is level side by side. I get braking action but it is jerking back an fourth when I tap or apply the brake. I am afraid if I apply the brakes firmly it is going to lockup the trailer when on the freeway. I believe the power side is working but I just can't get the controller to level per the directions which makes me believe that something is wrong with the controller and maybe unsafe.