Covers For the OEM Puck System Gooseneck Holes For A 2014 Ford F450
Updated 06/28/2018 | Published 06/26/2018 >
Products Featured in This Question
Question:
Should this cover fit the OEM puck system gooseneck hole in a 2014 Ford F450???
asked by: Cledith W
Expert Reply:
The CURT Rubber Ball Hole Cover # C66145 is made to cover holes in the truck bed made from the Quick Goose 2 # C630-644. The measurements are outer diameter: 3-1/4" and inner diameter: 2-1/4".
Since you have the OEM 5th wheel prep package in your 2014 Ford F-450., the puck covers or plugs will have to be obtained from a dealer. The aftermarket version of the underbed system is a little different than the factory one and they do not make those round covers available.
The round cover for the center gooseneck hole # RP30136 might be a fit for the center hole. The inside diameter is 2-3/8 inches and the outer diameter is 3-1/2 inches.
To be as accurate as possible, measure the inner and outer diameter of the puck system holes to determine if the cover is a fit.
Replacement Quick Turn Puck for Reese Elite Under Bed System # 116517
Puck Service Kit (Qty. 1) # 58253
Replacement Puck Plug Covers for Elite and Signature Series Fifth Wheel Rails (Qty 2) # 58199

