Does Draw Tite Hitch 76031 Fit 2017 Infiniti QX60 And Interfere with Backup Camera

Question

Question:

Will the hitch interfere with my backup sensor and camera?

asked by: Abhi

0

Expert Reply:

The Draw Tite hitch part # 76031 is a confirmed fit for your 2017 Infiniti QX60 and is compatible with the backup sensor and camera. If you were towing a trailer or had a bike rack installed in the hitch though that would most likely cause the sensor to go off and would block most of the camera's view.

expert reply by: Jameson C

0

Answer 1

You will be able to keep your spare tire mounted under the vehicle following the installation of the etrailer #e73AR. The spare tire will need to be lowered or temporarily removed to install the hitch. Once the hitch is installed, you won't have…

view full answer...

Answer 2

I have a solution for you that doesn't require any trimming of the fascia, but the etrailer Custom Fit Hitch #e98908 will likely require some trimming of the fascia during installation. However, the Draw-Tite #76031 sits a bit lower and does not…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 6

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Hey Kin, yes the Draw-Tite Max-Frame #DT28GR will fit your 2023 Toyota Corolla Cross XLE. This hitch has a 2,000 lb weight capacity, a 300 lb tongue weight capacity, and will work great with the Kuat Transfer V2 #KU84FR.

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

All 2020 Nissan Pathfinders come from the factory prewired for a brake controller and a 7-way trailer connector, though it might lack the 7-way and the relays needed to activate the tow package. You will need a brake controller. If your vehicle…

view full answer...

Answer 12

For your 2020 Nissan Pathfinder we have the Curt hitch part #C13309 as a confirmed fit that would work really well. It has a hidden crosstube so it's mostly out of plainsight, installs easily, and has great towing capacities. I attached a picture…

view full answer...

Does Draw Tite Hitch 76031 Fit 2017 Infiniti QX60 And Interfere with Backup Camera

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching