Installation of Ram Tailgate LED Lighted Emblem
Updated 04/13/2018 | Published 04/12/2018
Question:
I just purchased a Ram tailgate emblem that lights up when brakes are pressed see attached pic. Do you have an installation video link? I know you have one describing the product, but was wondering if you have a step by step video for the install?
asked by: Nick C
Expert Reply:
The Ram LED Lighted Vehicle Emblem - Black # RP86619 hardwires to your vehicle's tail lights. It uses a 3-wire hookup. The three wires are white (Ground), brown (Running Light) and red (Brake Light), and these connect to, respectively, the ground, running light circuit and brake light circuit. If your vehicle has a 2-wire system, in which one wire is used for both the brake light and turn signal functions, install the included converter to ensure correct performance.
A circuit tester like # PTW2993 helps identify the wire functions on your truck. This will allow you to probe through the insulation on the wire without splicing and once functions are determined you will use the included quick splice connectors. Unfortunately we don't have a video of this installation.
