Air Lift WirelessAIR Compressor System is Running but Showing

Updated 12/27/2017 | Published 12/26/2017

Products Featured in This Question

Air Lift WirelessAIR Compressor System for Air Helper Springs - Remote - Bluetooth

(392)

$622.10

Air Lift Air Hose Cutter

(97)

$25.93

Firestone 1/4" Air Line Tubing - 30' Long, Red

(21)

$22.64

Question:

Compressor is running but showing a bloc code and leak code

asked by: D H

Expert Reply:

If you have the Air Lift WirelessAIR Compressor System for Air Helper Springs # AL74000, the "LEAK" and "BL OC" codes actually may be related.

According to page 14 of the instructions the controller will activate the LEAK icon on the controller when a leak has
been detected, and controller will display “BL OC” to indicate there is a failure preventing an air spring from inflating or deflating.

If you have a leak somewhere then this may be preventing one of your springs from inflating. You should be able to take soapy water and test your lines by applying it and checking for any places where it is bubbling.

You can replace any damaged air line tubing with part # F9416 and use part # AL10530 to trim it to the size that you need.

expert reply by: Jon G