Troubleshooting Turn Signals Not Working Using T-One Wiring Harness on 2016 VW Touareg
Published 12/06/2017 >
Products Featured in This Question
Question:
Hi, I bought the T-ONE connector for my Touareg 2016, and the turn signals are nor working, do you know what can I do?
asked by: Alejandro G
Helpful Expert Reply:
The Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118668 you referenced is a confirmed fit for your 2016 VW Touareg. Since you mentioned your turn signals are not working, I recommend you double check the installation and ensure you have a good 12V power connection to your battery and clean metal to metal ground to your vehicle frame or metal body support. I recommend using the circuit tester # PTW2993 to check each function. I've attached a video and an article to assist.
If the functions are working correctly with the tester, then we can troubleshoot your trailer connection and wiring on the trailer itself. You can use a simple battery to connect the ground wire of your trailer to the negative terminal and then use the positive terminal to test each light function.
Product Page this Question was Asked From
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Vehicle End Connector
- Powered Converter
- No Tow Package
- 4 Flat
- Plug and Lead
- Plug-In
- Hidden
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: 2005-Current Volkswagen Touareg, Audi, or Porsche Cayenne
- Q&A: Installation Of A Brake Controller On 2012 Volkswagen Touareg
- Q&A: Wiring Harness for 2013 VW Touareg
- Article: Brake Controller Installation: Starting from Scratch
- Q&A: Brake Controller Recommendation for a Truck with Air Brakes and a Trailer with Electric Brakes
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Q&A: Replacement Roof Vent Cover For A Maxxair 4700G
- Q&A: Installation Instructions and Fascia Trimming for the Draw Tite Hitch part # 75950
- Q&A: Replacement Trailer Grease Seal for an NOK AD2527E Seal on a Boat Mate Trailer
- Q&A: How To Install Pulse Preventer On Vehicle with Factory Brake Controller Port
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Determining Trailer Tongue Weight




