Hitch, Wiring and Ball Mount for 2011 Hyundai Elantra Touring Hatchback
Updated 09/14/2017 | Published 09/13/2017 >
Products Featured in This Question
Question:
I want to make sure I am ordering the proper equipment for my vehicle. I need to be able to tow a lightweight 5x8 trailer behind my 2011 touring. I am reading that I should order the harness #118473, the Sportframe Receiver #24844 and the DrawBar #19260 for a 1 7/8 ball. The weight limit will be kept below the 750 pounds that I have read is available for towing on this vehicle. Again this is for a 2011, Haundya Elantra, Touring Hatch Back. Will I need to modify any of the trim on the vehicle. If I have missed anything or read bad information as far as the towing on this vehicle pls inform me. Thank you so much for your time.
asked by: Brian P
Helpful Expert Reply:
We do offer a confirmed hitch fit for your 2011 Hyundai Elantra Touring hatchback, the Draw-Tite Class I hitch # 24844. This custom-fit hitch offers no-drill installation but it will be necessary to remove the external dress panel beneath vehicle. The entire installation process and tools required are detailed in the linked instructions. I linked a helpful article too.
For wiring (if the trailer has lights) you can use 4-pole harness kit # 118473 which offers simple plug-in installation at your tail lights with no wire splicing required.
Ball mount # 3594 is indeed the recommended part and can be used with either 1-7/8-inch ball # 19256 or 2-inch ball # 19258.
I located and reviewed an online edition of the owner's manual for your 2011 Hyundai Elantra Touring and on page 5-51 it states that the vehicle is not recommended for towing a trailer. Your own printed manual may contain different information about your specific car so definitely check the manual index under "trailer towing" to confirm. A helpful article on towing is linked for you as well.

Product Page this Question was Asked From
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Concealed Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Correct Noise from Exhaust Rattling Against a Trailer Hitch
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: How To Deal With Muffler Rattling Against Trailer Hitch On 2012 Hyundai Elantra
- Q&A: Can a 2007 Hyundai Accent Pull a Trailer and What Parts Are Needed
- Q&A: Draw-Tite Receiver Location Relative to Rear Bumper of 2009 Hyundai Elantra
- Q&A: What All is Needed to Add an EZ Connector to a 2012 Expedition and Trailer?
- Q&A: Trailer Hitch Fit for 2013 Korean Built Elantra GT
- Q&A: Trailer Hitch and Wiring Recommendation 2014 Hyundai Elantra GT Hatchback from Korea
- Article: Trailer Wiring Diagrams