What Tools are Needed to Install Fulton Fold-Away Coupler Hinge Kit, # FHDPB330301
Question:
I am looking at the3X3 bolt on fold away hinge for the trailer of my 14 ft. lund boat. I would like to know what tools will be needed to install the part myself. Thanks
asked by: Jeff W
0
Expert Reply:
The tools needed to install the Fulton Fold-Away Coupler Hinge Kit, # FHDPB330301, are as follows.
1/2 inch drive ratchet
7/16 inch socket (for Torx bit)
Drill bits: 1/8, 1/4, 3/8, and 1/2
Safety glasses
Clamp
Jack stand
15/16 open end wrench and socket
Metal cutting saw
Torque wrench (capable of 80 foot pounds)
Gloves
Square
Wheel chocks
3/4 inch open end wrench and socket
1/2 inch chuck drill
Tape measure
Centerpunch
Hammer
expert reply by: Michael H
0
Product Page this Question was Asked From
Fulton Fold-Away Coupler Hinge Kit for 3" x 3" Tongue - Bolt On - Up to 5,000 lbs
- Folding Trailer Tongue
- Coupler Hinge Kit
- 48 Inch Fold-Away Tongue
- Bolt-On
- 5000 lbs GTW
- 3 x 3 Inch Tongue
- Fulton
more information >
Featured Help Information
Instructions
Similar Expert Q&A Pages
- Parts to Convert From 12 Inch Hydraulic to Electric Trailer Brakes
- Can the Fulton Fold-Away Coupler Hinge Kit # FHDPB330301 Be Mounted So the Tongue Swings Up Not Over
- Differences Between the Fulton Coupler Hinge Kits FHDPB330301 and FHDPB330303
- What Size Trailer Tongue Will Fulton Fold-Away Coupler Hinge Kit # FHDPB330301 Fit
- What Size is the Pivot Bolt on the Fulton Fold-Away Bolt-On Hinge Kit Part # FHDPB330301
- Can Fulton Fold-Away Coupler Hinge Kit be Used to Extend Short Trailer Coupler
- Can Fulton Fold-Away Coupler Hinge Kit # FHDPB330301
- Where Should a Fulton Fold Away hinge be Located on a Single Jet Ski Trailer
- Adapting Folding Coupler for 3 x 3 Trailer Tongues for Use on 2-1/2-Inch Trailer Frame
- Where to Attach the Safety Chains After Installing the Fulton Fold-Away Coupler Hinge Kit
- How To Determine Which Fulton Coupler Hinge Kit For Boat Traier
- Fulton Trailer Hinge Replacement Bolt Size
- Can the Fulton Fold-Away Coupler, FHDPB330301, Be Mounted So It Folds Upward?
- Should I Use a Bolt On or a Weld on Fold Away Coupler On a Shorelander Trailer with 3x3 Frame
- Can Trailer Fold Away Hinge Kits be Used with Surge Brake Actuators
- Replacement Bolt And Pin For Fold Away Tongue Trailer Coupler
- What Size Is the Pivot Pin for the Fulton Fold-Away Coupler Hinge Kit
- Replacement Bolt and Pin Recommendation for a Fulton Fold Away Coupler Hinge
- Can Fulton Fold-Away Coupler Hinge Kit Work in Aluminum Boat Trailer with Galvanized Steel Tongue
- How Much of the Trailer Tongue Needs to Go Inside Each End of a Fulton Trailer Tongue Hinge Kit
- Troubleshooting Up and Down Play with Fulton Swing Away Hinge Kit on a Magic Tilt Boat Trailer
- Availability of Folding 3 x 3-Inch Trailer Tongue Coupler for Aluminum Trailer
- Fulton Fold Away Hinge Kit 3x3 Fit on Trailer Tongue that is 7-3/4 inches Long
- Can You Move the Pivot Pin on a Fulton Fold-Away Coupler to Change Swing Direction
- How Much Clearance Needed Between Bed Rails and Bottom of 5th Wheel Trailer Overhang
- Replacement Clevis Pin for Fulton Fold-Away Coupler Hinge Kit
- Measuring for Fulton Coupler Hinge Kit # FHDPB330301 and Maximum Hinge Distance Allowed from Tongue