Install Brake Controller Harness Recommendation for 2011 Dodge Ram 1500  

Question:

Expert Reply:

For installing a brake controller in your 2011 Dodge Ram 1500 the correct install harness is the part # 3021-P which we have confirmed as a fit. This would be the adapter you'd need that would plug into the connector you found.

If you check out the install video I attached below you can see where you will find the install harness on your truck.

For a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake controller because of how well it works and how easy it is to setup. This is a proportional brake controller that senses the amount of braking the tow vehicle is applying and applies a proportionate amount to the trailer brakes. This will be the last brake controller you buy. It can easily be transferred to future vehicles as well.

expert reply by: Jameson C

0

Joe P.

6/13/2017

Further investigation there is no blue wire at the plug all different colors is it still the right plug

Jameson C.

6/14/2017

Vehicle manufacturers do not always match the color of their wires to the brake controller wires. The part # 3021-P is still the correct harness as the functions of the wires do match.