Installation Of Draw-Tite Class I 1-1/4 Inch Hitch # 24867 On A 2011 Nissan JUKE  

Question:

Expert Reply:

The Draw-Tite Class I 1-1/4 Inch Hitch, part # 24867, will fit your 2011 Nissan JUKE if it is an all-wheel drive (AWD) model. If you have the front-wheel drive (FWD) version of the 2011 Nissan JUKE, I recommend the CURT Class I 1-1/4 Inch Hitch, part # C11302.

There is no drilling or cutting required when installing the Hidden Hitch. It will be located under the rear fascia. You will, however, need to remove the factory tow hook and fasteners at the rear of the vehicle. I am including a link to the installation instructions on the Hidden Hitch. I do not currently have a picture of the hitch on a Nissan JUKE

The Draw-Tite, part # 24867, will need the Draw-Tite Ball Mount, part # 3593. Also, for towing you would need the Tow Ready 2 Inch Hitch Ball, part # 19258, or Tow Ready 1-7/8 Inch Hitch Ball, part # 19256, and the Curt T-Connector Wiring Harness, part # C56124. I am including a link to the instructions for the Curt wiring harness.

If you will be towing with this hitch, you will want to check your owners manual or the Nissan dealer for the towing capacity of your 2011 Nissan JUKE AWD.

expert reply by: Jeff D

0