Installing Two Anti-Sway Bars On A Standard Ball Mount.
Updated 12/12/2016 | Published 12/10/2016
Products Featured in This Question
Question:
I purchased 2 sway bars after watching a video and determining that these will help tremendously!! Problem is, I do not have a hitch like the one in the video..... I have a 4inch inverted. Now what?
asked by: Kurt
Expert Reply:
For your Reese Friction Sway Control Kit - Economy - by Draw-Tite, Reese and Hidden Hitch, # 83660, you can use a ball mount in the rise or drop position without any trouble. It sounds like you are using a 4 inch rise position, like the Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 9-1/4" Long - 7,500 lbs, # C45070. To use one of your sway bars, you would need the Reese Sway-Control Bracket for 2" Ball Mounts - Class III and IV, # RP26003, but for two you will need the weld on tabs like the Draw-Tite Sway Control Tab # 3442.
