Will The Dutton-Lainson Hand Winch with TUFFPLATE Finish 900 lbs Work To Raise 70 lb 16 Foot Canoe?
Published 11/23/2016 >
Products Featured in This Question
Question:
I am needing a winch to raise and lower a 70 pound 16 foot canoe from an 8 foot basement ceiling attaching to floor joists. Would this or the 1500 lb version be the best solution? Can a good quality synthetic rope like climbing rope be used instead of wire cable? Thanks
asked by: Greg
Helpful Expert Reply:
The Dutton-Lainson Hand Winch with TUFFPLATE Finish, Single Speed - 900 lbs., # DL15002, will meet and exceed your needs for lifting capacity. You can use a good quality synthetic rope instead of a wire cable if you like as long as it fits the manufacturers recommendation. In this case, the capacity of the winch is rated on using a 40 foot long 3/16 inch cable.
If you want to have a more controlled load, you may be interested in the Dutton-Lainson Worm Gear Hand Winch with Hex Drive Handle - 1,500 lbs, # DL11011. This hex drive would allow you to use a power drill and socked to operate. The worm gear will allow a much smoother functioning to both raise and lower your canoe.
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Dutton-Lainson Hand Winch - Worm Gear - Hex Drive - 1,500 lbs
- Q&A: Using Worm Gear Winch Versus Brake Winch for Hoisting Small Dinghy
- Video: Dutton-Lainson Hand Winch-DL10956 Spec Review
- Video: Dutton-Lainson Hand Winch: The Breakdown
- Video: Complete Breakdown of the Dutton-Lainson Hand Winch
- Video: Dutton-Lainson Trailer Winch DL24110 Review
- Shop: Dutton-Lainson Drill Drive Socket Adapter for DLB Series Winches
- Shop: Dutton-Lainson Hand Winch - Worm Gear - Split Reel - 1,500 lbs
- Shop: Universal Hand Winch Right Angle Mounting Bracket for Hand Winches by Dutton-Lainson
- Shop: Hand Winch Cable with Safety Hook 1/4" Diameter x 25' Long - 1,400 lbs.
- Shop: Dutton-Lainson Hand Winch - Worm Gear - Loop Drive - Split Reel - 1,500 lbs
- Shop: Hex Shaft for Dutton-Lainson Worm Gear Winches
- Q&A: What Dutton Lainson Jacks Does Dutton Lainson Socket Drill Adapter # DL6456 Fit
- Q&A: Can Dutton-Lainson Hand Winch 11011 Use 1/4 Inch Cable
- Q&A: Does Dutton Lainson Worm Gear Winch DL11011 Require Cable Fastener
- Q&A: Max Speed for Drill Powering Dutton-Lainson Hand Winch
- Q&A: Winch to Replace Shelby Model 5351 Winch
- Q&A: What Size Bolts Can Be Used On Dutton-Lainson Universal Hand Winch Mounting Bracket # DL24110
- Video: All About the Dutton-Lainson Hand Winch w/ Automatic Brake
- Video: An In-Depth Look at the Dutton-Lainson Hand Winch

