Can Pivot Bolt Be Removed from Fulton Fold-Away Coupler Hinge Kit FHDPW330300
Question:
can the pivot bolt be easily removed so I could completely remove the swinging tongue?
asked by: Kevin C
0
Expert Reply:
Yes, it is certainly possible to remove the pivot bolt from the Fulton Fold-Away Coupler Hinge Kit # FHDPW330300 to enable you to separate the two halves of the assembly. Both the pivot pin and pivot bolt are included with this assembly and it is intended for use on steel trailer frames (but not aluminum frames).
Also note that the weight capacity will be a function of the pivot length. This is detailed in the chart on the page, which I have also linked for you.
expert reply by:
Adam R
0
click to enlarge
Product Page this Question was Asked From
Fulton Fold-Away Coupler Hinge Kit for 3" x 3" Trailer Tongue - Weld On - Up to 5,000 lbs
- Folding Trailer Tongue
- Coupler Hinge Kit
- Up to 48 Inch Long
- Weld-On
- 5000 lbs GTW
- 3 x 3 Inch Tongue
- Fulton
more information >
Continue Researching
- Article: Guide to Choosing the Best Truck for 5th-Wheel Towing
- Q&A: Replacement Master Cylinder And Shock For UFP A-60 / A-75 / XR-84 Surge Brake Actuators
- Article: How to Install E-Track in 3 Easy Steps
- Q&A: How to Make Fulton A60 Swinging Coupler Compatible with Disc Brakes
- Q&A: Recommended Replacement for a Fulton A60 Surge Brake Actuator
- Q&A: Surge Brake Actuator Recommendation to Replace Fulton A60 on Trailer
- Q&A: How to Select the Proper Length Safety Chains for a Trailer
- Q&A: How to Determine the Correct Replacement Hubs for a Boat Trailer
- Q&A: Should I Use a Bolt On or a Weld on Fold Away Coupler On a Shorelander Trailer with 3x3 Frame
- Article: Best Boat Trailer Jacks
- Article: Where to Position the Trailer Axle?
- Article: How to Mount a Truck Bed Camper
- Article: How to Choose the Best Winch for You, your Boat, and your Trailer
- Article: Galvanized vs. Aluminum Trailers