Recommended 7- and 4-way Bumper Plug Extension for Use with Cabover Camper

Updated 05/19/2016 | Published 05/18/2016

Products Featured in This Question

TorkLift Wiring Harness Extension for 21" SuperTruss Hitch Extender - 7-Way RV

(28)

$111.33

Question:

I am installing this same SUV harness into the bed of my truck to free up my bumper plug. My camper has a 24inch overhang where I have to install a 24inch hitch extension for towing. So Now, I need a plug extension from my now freed up bumper plug to the bumper of my cab over camper. In fact, if it can include the 7-pin standard, and the 4 pin flat, that would be great! Thanks

asked by: Jim C

Expert Reply:

I have just the thing for you to extend your bumper plug to the end of your camper.

If you want to get the 7-way and 4-way you will want the # H20042 and the # HM48470. This combination will need to be wired up but will include the mounting bracket for the 7-way and 4-way.

If you prefer to have a prewired 7-way the one you will want it the # TLW6021. All of our prewired ones will only include the 7-way.

I have linked all the above mentioned products to this page for your convenience.

expert reply by: Jackie C