Trailer Hitch Compatibility for Honda Pilot and Acura MDX
Updated 03/04/2016 | Published 03/03/2016 >
Products Featured in This Question
Question:
I want to ask that since the curt hitch for 03-08 honda pilot is the same as for 01-06 acura mdx, would that mean that the oem hitch from the mdx would fit on a pilot right?
asked by: Yen C
Expert Reply:
Aftermarket trailer hitch fits for the 2005 Acura MDX and the 2005 Honda Pilot are indeed the same. Either vehicle can be fitted with three different Class III hitches, part # 75599 from Draw-Tite, part # 13328 from Curt and part 87454 from Hidden Hitch. No drilling is required for installing any hitch on either vehicle.
Since we do not sell the OEM hitch that was installed on the MDX I cannot guarantee that it will fit the Pilot but odds are pretty good that it will. Some vehicles' OEM hitches are bolted on while others are welded, so as long as your OEM hitch is bolted on you could remove it and potentially reinstall it.
Note that hitch installation hardware is intended to use used only once. It cannot be re-used. You will need to obtain the correct hardware kit for the OEM hitch before you attempt to install it. Your local Honda dealer may be able to help.
Or you can simply purchase a new aftermarket hitch which will come complete with all required hardware and instructions.
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- For Towing
- Class III
- 350 lbs TW
- 3500 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 500 lbs WD TW
- Concealed Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Video: Best 2024 Acura MDX Trailer Hitch Options
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Video: Curt Trailer Wiring Harness Installation - 2005 Honda Pilot
- Article: How to Clean Weld Nuts for the Installation of a Trailer Hitch | etrailer.com
- Q&A: Trailer Hitch and Bike Rack Recommendations for a 2008 Honda Pilot
- Article: How to Measure for Trailer Hitch Drop
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Can Surge Coupler/Actuators Be Converted from Drum to Disc Brake Operation
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Replacement for Peterson 134-15 Series Clearance Lights
- Q&A: Bike Rack Options For Two 52 Inch Wheelbase Bikes
- Q&A: 4-Way Trailer Wiring Recommendation for a 2014 Honda Pilot
- Q&A: Recommended Trailer Wiring Harness For 2014 Honda Pilot
- Article: My Trailer Hitch Doesn't Fit
- Article: How to Choose the Right Trailer Hitch Class
- Article: Brake Controller Installation: Starting from Scratch
- Article: Trailer Wiring Diagrams

