Adjusting the Power Level on a Tekonsha Voyager Brake Controller
Updated 10/19/2015 | Published 10/17/2015
Question:
I just bought truck cant figure out how to adjust it has an adjuster on each side
asked by: John M
Expert Reply:
I have included a link to the manual for the Tekonsha Voyager brake controller for you, # 39510. On the right hand side is the power knob and on the left side is the level knob.
The power knob adjusts how much voltage goes back to the trailer brakes. Rolling it forward towards the front of the truck increases the power.
the level knob will need to be pointing straight up and down (with the truck on level ground). Since you bought the truck with the controller already installed just check that the level knob is straight up and down.
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Brake Controller
- Q&A: Power Adjustment Instructions for Tekonsha Voyager Brake Controller
- Q&A: Troubleshooting Tekonsha Voyager Trailer Brake Controller by Running a Bench Test
- Q&A: Parts Needed To Add Electric Drum Brakes To A Trailer
- Q&A: Can Electric Over Hydraulic Brake Actuator Be Fully Submerged
- Q&A: Replacing 6-Way on Trailer With 7-Way Connector
- Q&A: Differences Between Marine and Standard Hydrastar Actuators
- Q&A: Adding Electric Over Hydraulic Disc Brakes to Boat Trailer