Replacement Vintage 4 Lug 13 inch Trailer Rim Recommendation
Updated 09/09/2015 | Published 09/08/2015
Products Featured in This Question
Question:
I need a spare rim or 2 for my utility trailer I need a 13inch 4bolt rim that measures 6.5inch bolt to bolt...but as I was reading I have seen Im supposed to measure across horizontally.. Is this correct? I have been looking for this rim for awhile..it sucks not having a spare..
asked by: Greg L
Expert Reply:
Most likely what you would need is the part # AM20208 but you would need to measure first. You will need to measure from the opposite sides of the wheel bolt holes like in the picture I attached. If that measurement is 9.44 inches this rim would fit and work well for you.
Product Page this Question was Asked From
Dexstar Vintage Steel Wheel w/ +5 mm Offset - 15" x 5" Rim - 4 on 9.44 - Silver
- Trailer Tires and Wheels
- Wheel Only
- 15 Inch
- 4 on 9.44 Inch
- Steel Wheels - Powder Coat
- Dexstar
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Recommended 14 Inch Wheels With 4 on 9.44 Bolt Pattern for 1975 Jayco Travel Trailer
- Q&A: What Drum do I Need to Replace My Lippert Drum with 696690 Stamped on it?
- Q&A: Replacement Wheel Recommendation for a Vintage Camper Trailer
- Q&A: Replacement Wheel for Old Vintage Wheel with 205/75-15 Size Tire
- Q&A: Need Replacement Wheel For 4 Bolt Dexter Axle on Old Hitchhiker Trailer With 225/75/15 Tire
- Q&A: What Type of Lug Nut Should Be Used with a 17.5" Alcoa Wheel with 9/16 Wheel Studs
- Q&A: Replacement Trailer Bearings for Shoreland’r Trailer with #84 Spindle
- Article: How to Raise Your Travel Trailer Height
- Article: Gooseneck to 5th Wheel Adapters
- Article: Where to Position the Trailer Axle?
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Our Team Picked The Best Camping Gear of the Year - Here Are Their Top Choices