What is Proper Trailer Wiring for a 2009 Scion xB
Updated 06/11/2010 | Published 06/10/2010
Products Featured in This Question
Question:
I have 2009 Scion xB. I am going to put a hitch on it for my Kendon Motorcycle Trailer 350lbs to tow my Harley 650 pounds. I went to a local place that does sale and installation and they told me my car needs special wiring cause they have to put a modulator in and run a power wire to the batterysomething about not enough power to just hook to back car lights. Is his correct or does your wiring kit for my car have everything and easily install? The hitch looks very easy to do.
asked by: don
Expert Reply:
The Modulite that the local place was referring to is the black box you see on part # 118468. Rest assured, this is the correct part for your 2009 Scion xB. The 2009 xB has separate brake and turn bulbs, so the box combines these two signals so it can hook up to standard trailer light systems.
There is also a loose red wire lead on the box that does need to be run to the battery. This is so the trailer is powered directly from the battery instead of pulling extra power through the factory vehicle tail lights. This is done for two reasons.
First, if you were to ever have a short on the trailer, it would blow the included fuse, instead of blowing the lights or fuses on the vehicle tail light circuits, which can be costly if they are LED lights. Second, sometimes the way the wiring is designed on a vehicle does not provide enough current to feed a trailer. This is always the case with LED tail lights and as vehicle bulbs become more efficient, it is becoming the situation on some incandescent tail light systems. Trailer lights do no get the same technology that vehicles do.
With the 118498 wiring harness and a hitch like part # 12490 from Curt, you would have everything you need, other than a ball, to safely tow your motorcycle trailer. I have added a link to the hitch and instructions for both the hitch and the wiring below.
Continue Researching
- Shop: Vehicle Tow Bar Wiring
- Shop: Trailer Wiring
- Video: Review of the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector-118460
- Video: All You Need to Know About the Draw-Tite Drawbar for 1-1/4" Hitch
- Shop: Trailer Hitch
- Search Results: dielectric grease
- Search Results: 3593
- Search Results: hitch pins and clips
- Q&A: Trailer Hitch, Hitch Ball, and Wiring Recommendations for a 2010 Scion xB
- Q&A: How Easy To Install T-One Vehicle Wiring Harness On Scion xB Is It Just Plug And Go
- Q&A: Everything Needed for a 2006 Scion XB to Tow a Small Trailer Carrying a Motorcycle
- Search Results: t~one vehicle wiring harness with 4~pole flat trailer connector
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K
- Q&A: Recommended Trailer Wiring Harness for 2012 Scion XB
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Search Results: trailer hitch
- Article: Trailer Wiring Diagrams
- Video: The Low-Down on the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer wiring
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Video: An In-Depth Look at the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit
- Shop: Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Way to 6-Way Coiled Adapter Cord
- Video: An In-Depth Look at the Roadmaster Battery Charge Line Kit for Towed Vehicles
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Shop: Suspension Enhancement
- Q&A: Lug Nut Torque Chart for Trailer Wheels
on Custom Fit Vehicle Wiring
