Do Factory Bolts Get Reused to Install Hitch in a 2015 Jeep Renegade TrailHawk

Published 08/06/2015

Question:

Hi, I wanted to know if there are videos or pictures of hitch install draw-tite 75790. If not, the forward 13/16inch bolts M14 on chassis rail I see is attached to or belongs too the bumper. I presume thats the same bolt Ill need to attach the hitch with? The side bolt on rail exists as well, before I crack the bumper bolt M14 I needed your help. Lastly, do I need to remove or detach muffler there seems to be very tight to get the socket aligned for best contact? Need a air gun to crack that bumper bolt

asked by: Jerry

Expert Reply:

You will need to remove the M14 frame bolts of your 2015 Jeep Renegade Trailhawk to install the part # 76021 that you referenced. The vehicles that have the towhooks will use the factory bolts for installation. Vehicles without tow hooks use the included hardware.

I attached a set of detailed installation instructions and a video for you to check out as well.

expert reply by: Jameson C