Diameter of the Mounting Stud of the 55-Watt Halogen Area Utility Light # QH16CTS
Updated 03/23/2015 | Published 03/21/2015
Question:
What Is The Bracket Mount Bolt SpecS. The One I Am Removing Has One 1/2inch x 2inch Bolt To Mount Bracket On traileR. I Prefer Not To Have To Drill Another Hole In trailer
asked by: Jim G
0
Expert Reply:
I went and pulled a 55-Watt Halogen Area Utility Light # QH16CTS from our warehouse to measure the diameter of the mounting stud and found that it is .3 of an inch (or 5/16 inch) and the nut on the stud is .5 of an inch in diameter. So if you wanted to use this on your setup you would need to use a washer with a hole in the center of it that is about .3 inches in diameter and an overall diameter of about 3/4 of an inch.
expert reply by:
Jameson C
0
