New Arrivals

Replaces a front wheel cradle on your Kuat Transfer V2 bike rack. Helps secure and stabilize your bike for travel. Mounting hardware included.

• Accessories and Parts
• Hitch Bike Racks
• Cradle and Arm Parts
• Cradles
• Transfer V2
• Kuat

Add 2-3/4" to 4-1/2" of rise to your Ibex rack crossbar height with this accessory kit, which also includes an adjustable width front Ibex MOLLE panel. Gain more mounting space without blocking your vision or sliding rear window access.

• Accessories and Parts
• Ladder Racks
• MOLLE Panel
• Hardware
• Riser
• Kuat

This kit includes 1 replacement air spring for Firestone Coil-Rite kit 4100. Spring fits inside an existing front coil spring to help level your vehicle, improve braking and handling, and reduce tire wear.

• Accessories and Parts
• Vehicle Suspension
• Springs
• Air Spring
• Coil-Rite
• Firestone

This handy 1/2" manifold plug works with your JR Products LP Gas Manifold to prevent leakage and keeps contaminates out for clean use.

• Accessories and Parts
• Propane Fittings
• Plugs
• Manifold
• JR Products

This all-purpose handle is commonly used next to your RV door to make it easier to get in and out, but it can easily be mounted anywhere you need to get a grip. Made with hard plastic for impact resistance and durability.

• Accessories and Parts
• RV Steps
• Grab Handles and Handrails
• Fixed Handle
• White
• JR Products

This all-purpose handle is commonly used next to your RV door to make it easier to get in and out, but it can easily be mounted anywhere you need to get a grip. Made with hard plastic for impact resistance and durability.

• Accessories and Parts
• RV Steps
• Grab Handles and Handrails
• Fixed Handle
• Black
• JR Products

Replacement plug fits on any female quick-disconnect port to keep out debris and moisture. Keeping that port clean is critical to create safe, secure connections and make sure the port works great for a long time.

• Accessories and Parts
• Propane Fittings
• Plugs
• JR Products

This screwdriver-like tool is required to disconnect hoses from your JR Products LP Gas Manifold.

• Accessories and Parts
• Propane Fittings
• Tools
• Manifold
• JR Products

Add extra sturdiness to a fold-out tray, slide-out camp kitchen, or portable table. Once installed, this table leg will fold flat against whatever you mount it to. Leg height adjusts in 1" increments from 22-1/2" up to 35-1/2"

• Accessories and Parts
• Camping Table
• Table Legs
• JR Products

Replace two 8mm lower wheel cradles on your Jack-IT Original Plus and other V-rack model bike racks. Supports the lower wheels on one bicycle.

• Accessories and Parts
• RV and Camper Bike Racks
• Cradle and Arm Parts
• Cradles
• Lets Go Aero

Replaces the rubber gaskets on your LaSalle Bristol black-water waste valve. Prevents sewer water from slowly leaking out of the valve. Includes two seals for both sides of the valve.

• Accessories and Parts
• RV Waste Valves
• Waste Valve Parts
• Seals
• LaSalle Bristol

Pipe assembly connects both drains in your dual-basin sink to a single 1-1/2" pipe. Seals included. Made of ABS plastic. Measures 11" center to center.

• Accessories and Parts
• Rv Sinks
• Drain Connector
• LaSalle Bristol

Repair the worn out motor and mounting brackets for your Motodrain waste valve.

• Accessories and Parts
• RV Waste Valves
• Motor
• LaSalle Bristol

Replaces the stopper in a LaSalle Bristol drains for bathroom sinks. Includes ring seal so you can fill your sink with water without it slowly draining out.

• Accessories and Parts
• RV Sinks
• Sink Stopper
• White
• LaSalle Bristol

Replaces the installation mounting hardware for your Longview original custom towing mirrors (LVT-3100B). Includes 2 clips, 2 knobs, and felt pads - enough for 1 pair of mirrors.

• Accessories and Parts
• Towing Mirrors
• Mounting Hardware
• Longview

Replaces the cartridge valve for your Lippert Flow Max kitchen or bathroom faucet.

• Accessories and Parts
• RV Faucets
• Cartridge
• Lippert

Replaces the drive arm assembly for your Lippert Edge RV awning without LEDs. Includes both the drive head and the arm. Black color matches your existing awning.

• Accessories and Parts
• RV Awnings
• Arms
• Drive Arms
• Lippert

Replaces the mount for your Solera 3000 Series RV awning.

• Accessories and Parts
• RV Awnings
• Mounting Hardware
• Lippert

This bracket allows you to mount your wind sensor on your Solera Smart Arm 12V power RV awning.

• Accessories and Parts
• RV Awnings
• Awning Savers
• Mounting Hardware
• Wind Sensor
• Brackets
• Lippert

Replaces 1 3/8" x 1-11/32" pin needed for your Solera RV awning. Dacromet finish resists corrosion.

• Accessories and Parts
• RV Awnings
• Hardware
• Arms
• Pins
• Lippert

Electric ground supply and wiring harness connects to the controller, breaker, and battery of your Hall Effect leveling system.

• Accessories and Parts
• Camper Jacks
• Wiring Harness
• Lippert

A damaged harness can make your RV's leveling system unreliable. This 4-pin interface harness restores electrical connections, ensuring smooth jack operation. Designed for Lippert Level-Up systems, it's a easy fix to get you back to camping.

• Accessories and Parts
• Camper Jacks
• Trailer Jack
• Wiring Harness
• Lippert

Lost or bent your extension rods? This replacement set gets your white Solera slide-out awning working like new again so you can get back to smooth RV living.

• Accessories and Parts
• RV Awnings
• Extension Rod
• White
• Lippert

Replaces the control board for your Lippert OneControl electric Travel Trailer RV leveling system (672136).

• Accessories and Parts
• Camper Jacks
• Controllers
• Control Panel
• Lippert