New Arrivals

Keep your Old Man Emu leaf springs in great shape with this custom-fit shackle kit. Zerk fittings make lubrication easy, reducing squeaks and wear. Designed for EL122RA and EL122RB leaf springs, the kit includes two complete shackles.

• Accessories and Parts
• Vehicle Suspension
• Leaf Springs
• Hardware
• Shackles
• Old Man Emu

Added gear can cause rear suspension sag, throwing off ride height and handling. A 10 mm coil spring packer levels your stance by compensating for uneven weight. Easy to install, it provides a subtle but effective lift for better balance and control.

• Accessories and Parts
• Vehicle Suspension
• Springs
• Spring Supports
• Old Man Emu

Tired of rocks beating up your shocks? These stone guards shield them from flying debris, keeping them in top shape for off-road adventures. Short-length design fits tight spaces, and the kit includes hardware for an easy install.

• Accessories and Parts
• Vehicle Suspension
• Vehicle Guards
• Rock Guard
• Old Man Emu

This nickel plated brass adapter tee provides a 1/4" NPT male to (2) 1/4" female fittings to split your NPT port into 2. Great for if you want to gain another outlet when using your supplied pressure switch.

• Accessories and Parts
• Tire Inflator
• Adapters
• Tees
• ARB

Protect your investment and add options to your Intensity V2 driving lights with clip-on polycarbonate covers. Used with round spot or flood lights, this black cover blocks light transmission, while limiting impact damage. Sold as a pair.

• Accessories and Parts
• Vehicle Lights
• Off Road Lights
• Light Covers
• Blackout
• ARB

Service liners are a great way to keep your Old Man Emu leaf springs running smoother and quieter. Just sandwich the durable plastic liners between the leaves. Includes 4 liners for springs up to 60 mm wide to get the job done.

• Accessories and Parts
• Vehicle Suspension
• Hardware
• Leaf Springs
• Liners
• Old Man Emu

Reinforce your front leaf springs for continuous off-road use with the FK10 Gusset Plates. This 4-piece kit is engineered for durability and offers reliable support for demanding terrains.

• Accessories and Parts
• Vehicle Suspension
• Leaf Springs
• Plates
• Old Man Emu

Inflate or deflate your tires using this tire pressure control system and your existing ARB compressor. Installs on your compressor and lets you control airing functions via your smartphone. Set target pressure, connect air hose, and press start.

• Accessories and Parts
• TPMS Sensor
• Air Bag Compressor Kit
• Vehicle Suspension
• Tire Pressure Control System
• ARB

Confidently install your Old Man Emu leaf springs with the OMESB89 bushing kit. Includes 4 bushings and 1 metal sleeve for use with OE shackles. Compatible with EL122RA and EL122RB leaf springs. Each spring requires one kit, so order accordingly.

• Accessories and Parts
• Vehicle Suspension
• Leaf Springs
• Bushings
• Old Man Emu

Control your air suspension or tire pressure using your ARB LINX interface (sold separately) with this pressure control kit. Works with your existing air compressor and LINX system to provide easy airing or deflating of air bags or tires.

• Accessories and Parts
• Vehicle Suspension
• Air Bag Compressor Kit
• TPMS Sensor
• Tire Pressure Monitor Parts
• Pressure Control Kit
• ARB

Confidently install your Old Man Emu leaf springs with this custom-fit replacement center bolt and nut. Each leaf spring requires 1 center bolt and nut.

• Accessories and Parts
• Vehicle Suspension
• Leaf Springs
• Hardware
• Bolts
• Old Man Emu

Front-end sag from added weight affects ride height and steering. A 10 mm coil spring packer restores balance by compensating for accessories like bumpers or winches. Easy to install, it provides a subtle lift for better handling and a level stance.

• Accessories and Parts
• Vehicle Suspension
• Springs
• Spring Supports
• Old Man Emu

Replace the clip liners on your Old Man Emu leaf spring to reduce friction and noise. These liners are custom-fit for your specific OME leaf spring so you know they will work perfectly. Includes 6 clip liners per package.

• Accessories and Parts
• Vehicle Suspension
• Leaf Springs
• Hardware
• Liners
• Old Man Emu

Worn bushings cause clunking, poor handling, and alignment issues. If your suspension feels loose or noisy, replacing your bushings may bring back control, comfort, and confidence - without replacing major components.

• Accessories and Parts
• Anti-Sway Bars
• Anti-Sway Bar Parts
• Bushings
• Old Man Emu

Protect your investment and add options to your Intensity V2 lights with clip-on polycarbonate covers. Used on AR40 light bars with spot or flood lights, this blue cover softens the gradient, reducing glare, while limiting impact damage. 1 Cover.

• Accessories and Parts
• Off Road Lights
• Vehicle Lights
• Light Covers
• Blue
• ARB

Monitor tire pressure on your vehicle or trailers with existing ARB TPMS sensors. Bluetooth module works with your ARB LINX system to track pressures on 1 vehicle and up to 3 trailers. Wires into your 12V electrical system.

• Accessories and Parts
• Air Bag Compressor Kit
• TPMS Sensor
• Vehicle Suspension
• Tire Pressure Monitor Parts
• Bluetooth Module
• ARB

Carry your recovery boards on top of your ARB Base platform rack with this mounting kit. Uses quick-release mounting pins. Secures 2 ARB Tred Pro, HD, and GT recovery boards to your Base platform rack.

• Accessories and Parts
• Roof Rack
• Carriers
• Mounting Hardware
• Brackets
• Recovery Board Carriers
• ARB

Replaces a flood beam light pod for your ARB V2 AR32 light or V2 AR32 light kit. 9" Round pod built for off-road driving in extreme conditions. Has universal pedestal mount and security hardware. 13" long, 2-pin DPT connector.

• Accessories and Parts
• Off Road Lights
• Vehicle Lights
• Pod Light
• ARB

Replace the clip liners on your Old Man Emu leaf spring to reduce friction and noise. These liners are custom-fit for your specific OME leaf spring so you know they will work perfectly. Includes 6 clip liners per package.

• Accessories and Parts
• Vehicle Suspension
• Leaf Springs
• Hardware
• Liners
• Old Man Emu

Confidently install your Old Man Emu leaf springs with this custom-fit replacement U-bolt kit, including 1 U-bolt, 2 washers, and 2 nuts. Most setups need 2 U-bolts per spring, so order accordingly if not reusing existing hardware.

• Accessories and Parts
• Vehicle Suspension
• Hardware
• Leaf Springs
• U-Bolts
• Old Man Emu

Keep your Old Man Emu leaf springs in great shape with this custom-fit shackle kit. Zerk fittings make lubrication easy, reducing squeaks and wear. Designed for CS009R and CS010R leaf springs, the kit includes two complete shackles.

• Accessories and Parts
• Vehicle Suspension
• Leaf Springs
• Hardware
• Shackles
• Old Man Emu

If your ARB Sahara bumper has empty fog light pockets, this kit fills them with functional lighting and a clean factory look. Use your original fog light wiring or ARBs harness to get it done right - no guesswork required.

• Accessories and Parts
• Bumper
• Light Kit
• ARB

Confidently install your Old Man Emu leaf springs with the OMESB117 bushing kit. Includes 6 bushings and 1 metal sleeve for use with OE shackles. Compatible with EL120R and EL121R leaf springs. Each spring requires one kit, so order accordingly.

• Accessories and Parts
• Vehicle Suspension
• Leaf Springs
• Bushings
• Old Man Emu

Confidently install your Old Man Emu leaf springs with this custom-fit replacement U-bolt kit, including 1 U-bolt, 2 washers, and 2 nuts. Most setups need 2 U-bolts per spring, so order accordingly if not reusing existing hardware.

• Accessories and Parts
• Vehicle Suspension
• Hardware
• Leaf Springs
• U-Bolts
• Old Man Emu