New Arrivals

Use this helper spring spacer kit when adding a helper spring to your Old Man Emu leaf spring pack. Includes a 70mm x 1.3 mm spacer and HDPE liners to reduce friction, prevent hotspots, and ensure proper spacing for smooth and durable performance.

• Accessories and Parts
• Vehicle Suspension
• Leaf Springs
• Spacers
• Helper Spring Spacer
• Old Man Emu

Replaces the wiring harness used with ARB Solis-series pod lights. Works with Solis 21 or Solis 36 lights. Equipped for 2 lights. Uses 4-pin AT connector.

• Accessories and Parts
• Vehicle Lights
• Off Road Lights
• Wiring Harness
• ARB

Worn bushings cause clunking, poor handling, and alignment issues. If your suspension feels loose or noisy, replacing your bushings may bring back control, comfort, and confidence - without replacing major components.

• Accessories and Parts
• Anti-Sway Bars
• Anti-Sway Bar Parts
• Bushings
• Old Man Emu

After a lift, your steering can feel twitchy or off-center, like your rig just won't hold a straight line. This caster kit adds 2 degrees of positive caster through a set of press-in bushings, helping your front end feel planted again.

• Accessories and Parts
• Vehicle Suspension
• Casters
• Old Man Emu

When you bleed pressure just to swap tools or close a line, you lose time waiting for your compressor to recover. This in-line valve lets you shut things off with a quarter turn and hold pressure in the system so you can keep working.

• Accessories and Parts
• On Board Air Compressor
• Tire Inflator
• Vehicle Suspension
• Air Bag Compressor Kit
• Valves
• Bulldog Winch

Control your vehicle's lights, air compressor, batteries, air lockers, and more, all from a single 8-switch panel. Control box mounts under the hood and powers switch panel via the included wiring harness.

• Accessories and Parts
• Wiring
• Switches
• Switch Panel
• Bulldog Winch

Some valve stems are tucked behind a fender or sit at a weird angle. This short, flexible hose gives you a little slack at the valve so you can connect the chuck without bending the main line or working at an awkward angle.

• Accessories and Parts
• Tire Inflator
• Valves
• Air Chuck
• Bulldog Winch

Some air chucks leak or pop off unless you hold them in place. This one pushes on and locks down so you can let go while the tire inflates. The internal shut-off keeps air in the system when it's not connected to a valve.

• Accessories and Parts
• Tire Inflator
• Valves
• Air Chuck
• Bulldog Winch

Control your vehicle's lights, air compressor, batteries, air lockers, and more, all from your phone or the 8-switch panel. Bluetooth-enabled control box mounts under the hood and powers switch panel via the included wiring harness.

• Accessories and Parts
• Wiring
• Switches
• Switch Panel
• Bulldog Winch

Some valve stems are buried deep or sit at the wrong angle for a standard chuck. This dual-head chuck with a flexible hose gives you the reach and angle you need to push the chuck onto the valve and fill the tire, even in tight spots.

• Accessories and Parts
• Air Bag Compressor Kit
• Tire Inflator
• On Board Air Compressor
• Vehicle Suspension
• Valves
• Air Chuck
• Bulldog Winch

Make it easier to reach your winch control plug with a 3' extension cord. Lets you plug in your wired controller even if your winch is mounted in a hard to reach location.

• Accessories and Parts
• Electric Winch
• Wiring
• Extension
• Plugs
• Bulldog Winch

You've got a compressor mounted in your truck or set up in the shop, so you're not about to move it. This hose lets you air up tires or run pneumatic tools up to 30 feet away. Works with most compressors using 1/4" connections.

• Accessories and Parts
• Vehicle Suspension
• Air Bag Compressor Kit
• Tire Inflator
• On Board Air Compressor
• Air Compressor Parts
• Hoses
• Bulldog Winch

Repairs the latching mechanism in your BedSlide truck bed slide. Works with all BedSlides made between 2010 and 2013. Kit includes 2 lock pins, 2 springs, 2 hairpin clips, and instructions.

• Accessories and Parts
• Truck Bed Slide
• Latches
• BedSlide

Replaces the wheel hook on your Benton bike rack (B54VR, B82FR, B54FR, and B34FR). This is the wheel hook that attaches to the top of the adjustable arm, to secure your bike's front tire.

• Accessories and Parts
• Hitch Bike Racks
• Cradle and Arm Parts
• Upright Hooks
• Shifts&Grins
• LittleShift
• Benton

Replaces the anti-rattle hitch pin for your Benton rack (B54VR, B82FR, B54FR, B34FR, and B94FR).

• Accessories and Parts
• Hitch Bike Racks
• Pins and Clips
• Pins
• LittleShift
• Shifts&Grins
• ShiftShow
• Benton

Replaces the hardware for your Benton LittleShift bike rack (B54FR).

• Accessories and Parts
• Hitch Bike Racks
• Hardware
• LittleShift
• Benton

Installed an ARB Summit bumper on your Tacoma and lost your front camera view? This relocation kit moves the camera to a better spot in the grille - restoring visibility and making your Multi Terrain Monitor useful again.

• Accessories and Parts
• Bumper
• Relocation Kit
• ARB

Sway bars help on the road, but off-road, they limit your flex. This full disconnect kit replaces your factory sway bar links and adds quick-release pins, so you can unhook your sway bars and let your suspension work the way it should.

• Accessories and Parts
• Anti-Sway Bars
• Anti-Sway Bar Parts
• End Link
• Rear Anti-Sway Bar
• Front Anti-Sway Bar
• Old Man Emu

Worn bushings cause clunking, poor handling, and alignment issues. If your suspension feels loose or noisy, replacing your bushings may bring back control, comfort, and confidence - without replacing major components.

• Accessories and Parts
• Vehicle Suspension
• Panhard Rod
• Bushings
• Old Man Emu

Your rear shocks take a beating from rocks and debris - especially off-road. This stone guard protects one Nitrocharger Plus rear shock from impact damage. If you're running two rear shocks, make sure to order a pair.

• Accessories and Parts
• Vehicle Suspension
• Shock Absorber
• Rock Guard
• Old Man Emu

Protect your investment and add options to your Intensity V2 Solis driving lights with clip-on polycarbonate covers. Used with spot or flood models, the amber color adds contrast in fog or wet conditions, while limiting impact damage. 1 Cover.

• Accessories and Parts
• Off Road Lights
• Vehicle Lights
• Light Covers
• Amber
• ARB

Keep your Old Man Emu leaf springs in peak condition with this custom-fit shackle kit. Zerk fittings simplify maintenance and reduce wear. Designed for CS061R, CS150R, and CS151R leaf springs, the kit includes two complete shackles.

• Accessories and Parts
• Vehicle Suspension
• Leaf Springs
• Hardware
• Shackles
• Old Man Emu

Confidently install your Old Man Emu leaf springs with this custom-fit replacement U-bolt kit, including 1 U-bolt, 2 washers, and 2 nuts. Most setups need 2 U-bolts per spring, so order accordingly if not reusing existing hardware.

• Accessories and Parts
• Vehicle Suspension
• Hardware
• Leaf Springs
• U-Bolts
• Old Man Emu

Reusing old top hat hardware can lead to noise, wear, and poor performance. This complete kit replaces everything - bushes, washers, bearing plate, and more - for a clean install and like-new ride quality without the guesswork.

• Accessories and Parts
• Vehicle Suspension
• Top Hat
• Old Man Emu