Confidently install your Old Man Emu leaf springs with this custom-fit replacement U-bolt kit, including 1 U-bolt, 2 washers, and 2 nuts. Most setups need 2 U-bolts per spring, so order accordingly if not reusing existing hardware.
When you lift the rear of your rig, the sway bar can end up out of position. This rear sway bar link brings it back into proper alignment - helping you maintain stability and predictable handling on- and off-road.
Reduce friction and prevent squeaking with SRBC60B interleaf liners for Old Man Emu Leaf Springs. These HDPE liners feature a short retention clip that is designed to be sandwiched securely between leaves, with contact on both sides.
Replaces a spot beam light pod for your ARB Solis 21 light or Solis 21 light kit. 7" Round pod built for off-road driving in extreme conditions. Has universal pedestal mount and security hardware. 17-3/4" long, 4-pin AT connector.
Replaces the wiring harness for the AR21 and AR32 round driving lights. Works with the ARB AR21 and AR32 lights. Full harness includes a driver's switch with an LED indicator, and all mounting hardware for up to 2 lights.
Not running a winch? This fairlead cover panel bolts into place on your ARB Summit bumper to clean up the opening - protecting the fairlead mount and giving your bumper a finished, factory look.
Confidently install your Old Man Emu leaf springs with the OMESB99 bushing kit. Includes 6 bushings and 1 metal sleeve for use with OE shackles. Compatible with CS016R, CS150R, and CS151R leaf springs. Each spring pack requires one bushing kit.
Replaces a flood beam light pod for your ARB V2 AR21 light or V2 AR21 light kit. 7" Round pod built for off-road driving in extreme conditions. Has universal pedestal mount and security hardware. 13" long, 2-pin DPT connector.
Got lights but no good place to mount them? This ARB light bracket clamp gives you a solid, secure way to mount 35 mm round lamps to your ARB bumper, no guesswork.
Use this helper spring spacer kit when adding a helper spring to your Old Man Emu leaf spring pack. Includes a 70mm x 1.3 mm spacer and HDPE liners to reduce friction, prevent hotspots, and ensure proper spacing for smooth and durable performance.
Replaces the wiring harness used with ARB Solis-series pod lights. Works with Solis 21 or Solis 36 lights. Equipped for 2 lights. Uses 4-pin AT connector.
Worn bushings cause clunking, poor handling, and alignment issues. If your suspension feels loose or noisy, replacing your bushings may bring back control, comfort, and confidence - without replacing major components.
After a lift, your steering can feel twitchy or off-center, like your rig just won't hold a straight line. This caster kit adds 2 degrees of positive caster through a set of press-in bushings, helping your front end feel planted again.
Eliminate the need for blocks with this trailer jack foot designed for XO750 Ark Xtreme off-road jacks. Foot stand extends your jack height, and protects your tires from compressing over prolonged storage times. Increases jack height by 3".
Installed an ARB Summit bumper on your Tacoma and lost your front camera view? This relocation kit moves the camera to a better spot in the grille - restoring visibility and making your Multi Terrain Monitor useful again.
Sway bars help on the road, but off-road, they limit your flex. This full disconnect kit replaces your factory sway bar links and adds quick-release pins, so you can unhook your sway bars and let your suspension work the way it should.
Worn bushings cause clunking, poor handling, and alignment issues. If your suspension feels loose or noisy, replacing your bushings may bring back control, comfort, and confidence - without replacing major components.
Your rear shocks take a beating from rocks and debris - especially off-road. This stone guard protects one Nitrocharger Plus rear shock from impact damage. If you're running two rear shocks, make sure to order a pair.
Protect your investment and add options to your Intensity V2 Solis driving lights with clip-on polycarbonate covers. Used with spot or flood models, the amber color adds contrast in fog or wet conditions, while limiting impact damage. 1 Cover.
Keep your Old Man Emu leaf springs in peak condition with this custom-fit shackle kit. Zerk fittings simplify maintenance and reduce wear. Designed for CS061R, CS150R, and CS151R leaf springs, the kit includes two complete shackles.
Confidently install your Old Man Emu leaf springs with this custom-fit replacement U-bolt kit, including 1 U-bolt, 2 washers, and 2 nuts. Most setups need 2 U-bolts per spring, so order accordingly if not reusing existing hardware.
Reusing old top hat hardware can lead to noise, wear, and poor performance. This complete kit replaces everything - bushes, washers, bearing plate, and more - for a clean install and like-new ride quality without the guesswork.
Replaces the clear light cover on all ARB Solis 36 lights. Clips onto all ARB Solis 36 lights. Polycarbonate cover clips into place to protect your bezel and lens from impact.
Lifting your rig can throw your axle off-center, especially in the rear. This extension bracket helps correct panhard rod angles - restoring axle alignment and handling when fitting an OME rod on a left-hand drive vehicle.