If you're rafting up with friends, tying off at the dock, or dropping a small boat anchor, this floating rope clips on fast, resists twisting, and gives you 50' of hollow-braid strength for weekend boat days.
Loose batteries cause wiring problems and shorts in your boat or RV. This tray fits 29 or 31 series batteries and keeps them secure in tight spaces, so you do not have to worry about bounce or losing power when you are on the water or on the road.
After a full day on the water, you want docking to feel easy and calm. These double-braided fender lines are soft in your hands, tough in the sun and spray, and help you tie up quickly so you can enjoy the end of your boating day.
You found the right spot and need your boat to stay put. This pre-rigged nylon anchor line clips on fast, resists UV damage, and gives you 50' of strong, flexible rope that won't twist up when the day winds down.
You found the right spot and need your boat to stay put. This pre-rigged nylon anchor line clips on fast, resists UV damage, and gives you 100' of strong, flexible rope that won't twist up when the day winds down.
Tangled ropes and cords used to slow things down. With these sturdy wraps, your gear stays organized and easy to grab, so you can get started right away and keep your space clear from the start to the end of every trip.
Skip the soaked sleeves and sore back. This compact system floats your anchor to the surface so you don't have to haul it up by hand. You don't need to run wires or use a winch. All you need is physics and a little forward motion.
You found the right spot and need your boat to stay put. This pre-rigged nylon anchor line clips on fast, resists UV damage, and gives you 150' of strong, flexible rope that won't twist up when the day winds down.
If you're rafting up with friends, tying off at the dock, or dropping a small boat anchor, this floating rope clips on fast, resists twisting, and gives you 100' of hollow-braid strength for weekend boat days.
Docking usually happens when you're tired, ready to relax, or focused on tying up safely, not tying tricky knots. Tie your fender line once, snap it into this flush-mount plate, and you're done.
You found the right spot and need your boat to stay put. This pre-rigged, floating anchor line clips on fast, resists twisting, and gives you 50' of solid braid thats easy to coil and tough enough for the weekend grind.
Loose batteries cause wiring problems and shorts in your boat or RV. This tray fits 27 or 27M series batteries and keeps them secure, so you do not have to worry about bouncing batteries or losing power on the water or on the road.
Ever watched your boat drift while you're trying to relax or cast a line? This chain adds just enough weight to help your anchor bite fast and stay put so your boat holds steady while you focus on the water.
When you bleed pressure just to swap tools or close a line, you lose time waiting for your compressor to recover. This in-line valve lets you shut things off with a quarter turn and hold pressure in the system so you can keep working.
Control your vehicle's lights, air compressor, batteries, air lockers, and more, all from a single 8-switch panel. Control box mounts under the hood and powers switch panel via the included wiring harness.
Some valve stems are tucked behind a fender or sit at a weird angle. This short, flexible hose gives you a little slack at the valve so you can connect the chuck without bending the main line or working at an awkward angle.
Some air chucks leak or pop off unless you hold them in place. This one pushes on and locks down so you can let go while the tire inflates. The internal shut-off keeps air in the system when it's not connected to a valve.
Control your vehicle's lights, air compressor, batteries, air lockers, and more, all from your phone or the 8-switch panel. Bluetooth-enabled control box mounts under the hood and powers switch panel via the included wiring harness.
Some valve stems are buried deep or sit at the wrong angle for a standard chuck. This dual-head chuck with a flexible hose gives you the reach and angle you need to push the chuck onto the valve and fill the tire, even in tight spots.
Make it easier to reach your winch control plug with a 3' extension cord. Lets you plug in your wired controller even if your winch is mounted in a hard to reach location.
You've got a compressor mounted in your truck or set up in the shop, so you're not about to move it. This hose lets you air up tires or run pneumatic tools up to 30 feet away. Works with most compressors using 1/4" connections.
Repairs the latching mechanism in your BedSlide truck bed slide. Works with all BedSlides made between 2010 and 2013. Kit includes 2 lock pins, 2 springs, 2 hairpin clips, and instructions.