New Arrivals

If you need to disconnect the battery to flat tow your vehicle, you're going to want this kit. It disconnects your battery with the turn of a knob - much safer and faster than doing it yourself - while keeping your towing accessories charged.

• Accessories and Parts
• Flat Tow Wiring Harness
• Auto Battery Disconnect
• Blue Ox

Shank measures 12" long from the center of the hitch pin hole to the center of the adjustment holes. 7 Bolt holes let you adjust the height of your Blue Ox SwayPro weight distribution system. Fits 2" receivers. 850 lb tongue weight.

• Accessories and Parts
• Weight Distribution Hitch
• Shanks
• 700 lbs
• Fits 2 Inch Hitch
• Blue Ox

When you bleed pressure just to swap tools or close a line, you lose time waiting for your compressor to recover. This in-line valve lets you shut things off with a quarter turn and hold pressure in the system so you can keep working.

• Accessories and Parts
• On Board Air Compressor
• Tire Inflator
• Vehicle Suspension
• Air Bag Compressor Kit
• Valves
• Bulldog Winch

Control your vehicle's lights, air compressor, batteries, air lockers, and more, all from a single 8-switch panel. Control box mounts under the hood and powers switch panel via the included wiring harness.

• Accessories and Parts
• Wiring
• Switches
• Switch Panel
• Bulldog Winch

Some valve stems are tucked behind a fender or sit at a weird angle. This short, flexible hose gives you a little slack at the valve so you can connect the chuck without bending the main line or working at an awkward angle.

• Accessories and Parts
• Tire Inflator
• Valves
• Air Chuck
• Bulldog Winch

Some air chucks leak or pop off unless you hold them in place. This one pushes on and locks down so you can let go while the tire inflates. The internal shut-off keeps air in the system when it's not connected to a valve.

• Accessories and Parts
• Tire Inflator
• Valves
• Air Chuck
• Bulldog Winch

Control your vehicle's lights, air compressor, batteries, air lockers, and more, all from your phone or the 8-switch panel. Bluetooth-enabled control box mounts under the hood and powers switch panel via the included wiring harness.

• Accessories and Parts
• Wiring
• Switches
• Switch Panel
• Bulldog Winch

Some valve stems are buried deep or sit at the wrong angle for a standard chuck. This dual-head chuck with a flexible hose gives you the reach and angle you need to push the chuck onto the valve and fill the tire, even in tight spots.

• Accessories and Parts
• Air Bag Compressor Kit
• Tire Inflator
• On Board Air Compressor
• Vehicle Suspension
• Valves
• Air Chuck
• Bulldog Winch

Make it easier to reach your winch control plug with a 3' extension cord. Lets you plug in your wired controller even if your winch is mounted in a hard to reach location.

• Accessories and Parts
• Electric Winch
• Wiring
• Extension
• Plugs
• Bulldog Winch

You've got a compressor mounted in your truck or set up in the shop, so you're not about to move it. This hose lets you air up tires or run pneumatic tools up to 30 feet away. Works with most compressors using 1/4" connections.

• Accessories and Parts
• Vehicle Suspension
• Air Bag Compressor Kit
• Tire Inflator
• On Board Air Compressor
• Air Compressor Parts
• Hoses
• Bulldog Winch

Repairs the latching mechanism in your BedSlide truck bed slide. Works with all BedSlides made between 2010 and 2013. Kit includes 2 lock pins, 2 springs, 2 hairpin clips, and instructions.

• Accessories and Parts
• Truck Bed Slide
• Latches
• BedSlide

This 7-way to SAE cable connects your vehicle with a 7-way RV style connector to a SAE power cable. Works with any 12V accessory that has a SAE connector on its power cord.

• Accessories and Parts
• Tire Inflator
• Adapters
• Air Lift

This SAE to alligator clamps cable connects your 12V battery to your SAE power cable. Works with any 12V accessory that has a SAE connector on its power cord.

• Accessories and Parts
• Tire Inflator
• Adapters
• Clamps
• Air Lift

You'll need this air distribution box if you're upgrading your RV's AC to a 2025 ducted or ductless system with the new R32 refrigerant. New ACs will not work with any systems from 2024 or earlier.

• Accessories and Parts
• RV Air Conditioners
• Air Distribution Box
• White
• Advent Air

Shank measures 12" long from the center of the hitch pin hole to the center of the adjustment holes. 7 Bolt holes let you adjust the height of your Blue Ox TrackPro weight distribution system. Fits 2" receivers. 850 lb tongue weight.

• Accessories and Parts
• Weight Distribution Hitch
• Shanks
• 700 lbs
• Fits 2 Inch Hitch
• Blue Ox

Mount your Blue Ox SwayPro weight distribution system with this heavy-duty shank. Designed for 2" hitches, this steel shank installs in either the rise or drop position and handles up to 15,000 lbs of trailer weight.

• Accessories and Parts
• Weight Distribution Hitch
• Shanks
• 1400 lbs TW
• Fits 2 Inch Hitch
• Blue Ox

Replace the swivel assembly for your Blue Ox Avail or Ascent tow bars (BX7420 or BX4370).

• Accessories and Parts
• Tow Bar
• Swivel Collar
• Ascent
• Avail
• Blue Ox

You lost your rear factory camera when you removed the tailgate, but you don't have to give up safety. This camera mounts on your license plate and plugs into your truck's harness to bring that view back to your screen when you back up.

• Accessories and Parts
• Backup Camera
• Camera
• Wiring
• Tailgate Handle Camera
• Wiring Harness
• Brandmotion

Replaces the spacer bracket for installing diverter control handles on your B&B RV Nautilus P3 or P4 panel. Spans the distance from the valve to the back of the panel for added support and smooth operation.

• Accessories and Parts
• Smart RV
• Handles
• B and B Molders

Replaces the monitor for your Brandmotion Wireless HD Oberservation System.

• Accessories and Parts
• Backup Camera
• Monitors
• Dash Monitor
• Brandmotion

You want a better view behind you, but you're not looking to add an extra screen inside your vehicle. This touchscreen rear view mirror gives you a full LCD camera display right on the mirror. Just add your own camera, and you're set.

• Accessories and Parts
• Backup Camera
• Monitors
• Rearview Mirror Monitor
• Brandmotion

You lost your rear factory camera when you removed the tailgate, but you don't have to give up safety. This camera mounts on your license plate and plugs into your truck's harness to bring that view back to your screen when you back up.

• Accessories and Parts
• Backup Camera
• Camera
• Wiring
• Tailgate Handle Camera
• Wiring Harness
• Brandmotion

Add this heavy-duty camera to your Brandmotion monitor and improve your driving experience. Get a wide, clear view, parking lines, and low-light vision, so you always know what's behind you. Plus, the low-profile design is less obtrusive.

• Accessories and Parts
• Backup Camera
• Camera
• Standard Camera
• Brandmotion

You built your own setup, so you want a camera that's just as flexible. This bullet camera gives you a wide, adjustable rear view and a low-profile install, so you can upgrade your aftermarket display and see what's really behind you.

• Accessories and Parts
• Backup Camera
• Camera
• Flush Mount Camera
• Brandmotion