New Arrivals

Replace your lost or damaged Andersen 2-5/16" weight distribution hitch ball. Designed for use with Andersen weight distribution hitches, this replacement restores safe towing performance.

• Accessories and Parts
• Weight Distribution Hitch
• Balls
• Andersen

If your factory gooseneck hitch has a pop-in ball, this adapter is the missing piece to mount your Andersen Ultimate Connection Hitch and tow your 5th wheel. No adapter means no towing, so slap this bad boy in and hit the road with confidence.

• Accessories and Parts
• 5th Wheel Gooseneck Adapter
• Adapters
• Pop-In Ball
• Andersen

Get the height your setup needs with this 14" square coupler tube for your Andersen Ultimate Connection. Extra height helps level your setup, improve clearance, and deliver the smooth towing experience you're after. Mounting bolts included.

• Accessories and Parts
• 5th Wheel Gooseneck Adapter
• Coupler
• Andersen

Replaces the 2-5/16" and 2" combo hitch ball for your Andersen EZ heavy-duty adjustable ball mount or weight distribution system. Includes combo ball and 2 pins and clips.

• Accessories and Parts
• Trailer Hitch Ball Mount
• Drop Hitch
• Balls
• Dual Ball
• 2 Inch Ball
• 2-5/16 Inch Ball
• Andersen

This tire change kit makes swapping out a flat on your multi-axle trailer a total breeze. Just drive the good tire up onto the leveler to raise the adjacent tire up to 4" off the ground. You will be back on the road in no time.

• Wheel Chocks
• Accessories and Parts
• Trailer Tires and Wheels
• Tire Change Jack
• Andersen

Need more slack in your Andersen weight-distribution tension chains? Add up to 11-1/4" instantly with these extensions6 links plus a threaded coupler per side. Remove any links you dont need for a custom fit and smoother hitch setup.

• Accessories and Parts
• Weight Distribution Hitch
• Chains
• Andersen

You're lining up the fifth wheel, solo in the driveway, no spotter this time. With one try, it clicks into place. You step out, check the connection, and smile. That funnel did exactly what it promised.

• Accessories and Parts
• 5th Wheel Hitch
• Gooseneck Coupler Adapter
• Andersen

This 7-way to SAE cable connects your vehicle with a 7-way RV style connector to a SAE power cable. Works with any 12V accessory that has a SAE connector on its power cord.

• Accessories and Parts
• Tire Inflator
• Adapters
• Air Lift

This SAE to alligator clamps cable connects your 12V battery to your SAE power cable. Works with any 12V accessory that has a SAE connector on its power cord.

• Accessories and Parts
• Tire Inflator
• Adapters
• Clamps
• Air Lift

Lifting the rear suspension can throw off your panhard angle - and your handling. This relocation bracket re-centers the axle, corrects rear geometry, and raises the roll center to improve stability on- and off-road.

• Accessories and Parts
• Vehicle Suspension
• Hardware
• Brackets
• Extension Bracket
• Old Man Emu

You've got the compressor, now you need a smart place to mount it. This bolt-on bracket tucks your ARB air compressor neatly under the hood of your Ford Bronco, with room for switches, manifold, and all the trail-day essentials.

• Accessories and Parts
• On Board Air Compressor
• Tire Inflator
• Mounting Hardware
• Brackets
• ARB

Added gear can cause rear suspension sag, throwing off ride height and handling. A 5 mm coil spring packer levels your stance by compensating for uneven weight. Easy to install, it provides a subtle but effective lift for better balance and control.

• Accessories and Parts
• Vehicle Suspension
• Springs
• Spring Supports
• Old Man Emu

Simplify installation of Old Man Emu leaf springs on your truck with the FK91 replacement mounting bolt. Designed for the driver's side front mount, this kit eliminates the need to lower the gas tank by replacing the OE mounting bolt.

• Accessories and Parts
• Vehicle Suspension
• Leaf Springs
• Hardware
• Bolts
• Old Man Emu

Replaces a spot beam light pod for your ARB Solis 36 light or Solis 36 light kit. 7" Round pod built for off-road driving in extreme conditions. Has universal pedestal mount and security hardware. 17-3/4" long, 4-pin AT connector.

• Accessories and Parts
• Off Road Lights
• Vehicle Lights
• Pod Light
• ARB

Mounting a WARN winch on your ARB bumper 3413050, 3432080, 3430020, or 3411050? If the spacings off, your install can stall. This spacer kit gives you the clearance you need to mount your winch cleanly and keep your build moving forward.

• Accessories and Parts
• Bumper
• Spacers
• ARB

Fine-tune your vehicle's ride height and balance with this durable 10mm-thick x 70mm-wide leaf trim packer, designed specifically for Old Man Emu leaf springs.

• Accessories and Parts
• Vehicle Suspension
• Leaf Springs
• Spacers
• Leaf Trim Packer
• Old Man Emu

Confidently install your Old Man Emu leaf springs with this custom-fit bushing kit. Includes 6 bushings made of durable polyurethane and rubber to reduce squeaks and last longer. Each spring requires one kit, so order accordingly.

• Accessories and Parts
• Vehicle Suspension
• Leaf Springs
• Bushings
• Old Man Emu

Wiring loom extension set up specifically for use with the Intensity V1 Light Bars. Add 16' to the primary harness (3500810 - sold separately) for alternative installations. Utilizes waterproof 2-pin DTP connectors.

• Accessories and Parts
• Vehicle Lights
• Off Road Lights
• Wiring Harness
• Extension
• ARB

Keep your Old Man Emu leaf springs in top condition with this custom-fit shackle kit. Zerk fittings simplify lubrication, reducing wear and noise. Designed for CS055R leaf springs, the kit includes two complete shackles.

• Accessories and Parts
• Vehicle Suspension
• Hardware
• Leaf Springs
• Shackles
• Old Man Emu

Confidently install your Old Man Emu leaf springs with this custom-fit bushing kit. Includes 4 bushings and 2 sleeves made of durable polyurethane and rubber to reduce squeaks and last longer. Each spring requires one kit, so order accordingly.

• Accessories and Parts
• Vehicle Suspension
• Leaf Springs
• Bushings
• Old Man Emu

Mount your powerful LED light bar to a round bull bar or rack using this clamp kit. The kit integrates to the AR40's housing and features a security nut system to protect your investment. Installation hardware and security tool included.

• Accessories and Parts
• Vehicle Lights
• Off Road Lights
• Mounting Hardware
• Brackets
• Black Steel
• ARB

Confidently install your Old Man Emu leaf springs with this custom-fit replacement center bolt and nut. Each leaf spring requires 1 center bolt and nut.

• Accessories and Parts
• Vehicle Suspension
• Hardware
• Leaf Springs
• Bolts
• Old Man Emu

Protect your investment and add options to your light bar with these clip-on polycarbonate covers. Used on Slimline bars with spot or flood lights, this clear cover has minimal effect on lighting, while limiting impact damage. Sold as a pair.

• Accessories and Parts
• Off Road Lights
• Vehicle Lights
• Light Covers
• 9 Inch Long
• Clear
• ARB

Replace the clip liners on your Old Man Emu leaf spring to reduce friction and noise. These liners are custom-fit for your specific OME leaf spring so you know they will work perfectly. Includes 4 clip liners per package.

• Accessories and Parts
• Vehicle Suspension
• Hardware
• Leaf Springs
• Liners
• Old Man Emu