New Arrivals

Loading your fishing or jon boat at a busy ramp can be tricky, but this side guide roller helps every time. Mounted along your trailer, it gently centers your boat for smooth loading, so you can skip the struggle and get off the water faster.

• Boat Trailer Parts
• Rollers
• Side Guide Roller
• 2-1/2 Inch Diameter
• 12 Inch Long
• Fits 1/2 Inch Shaft
• CE Smith

When you need sturdy sidewalls for your flatbed truck or utility trailer, this weld-on stake pocket makes it simple. Just drop in a 2x4 board and know your cargo is staying put. It's raw metal, so give it a painted finish to prevent rusting.

• Tie Down Anchors
• Trailer Tie-Down Anchors
• Truck Tie-Down Anchors
• Stake Pockets
• 2 x 4 Stake Pocket
• Surface Mount - Weld-On
• CE Smith

9" Wide x 32" long x 15" tall. Constructed of steel, this round, galvanized fender can be painted to match your trailer. You get both a stylish look and years of use. It bolts to your trailer and fits 15" wheels.

• Trailer Fenders
• No Step
• 15 Inch Wheels
• 9 Inch Wide
• 32 Inch Long
• Galvanized Steel
• For Single-Axle Trailers
• Gray
• CE Smith

• Trailer Fenders
• No Step
• 15 Inch Wheels
• 16 Inch Wheels
• 10 Inch Wide
• 72 Inch Long
• Steel
• For Tandem-Axle Trailers
• Gray
• CE Smith

This hanger bracket secures the eye end of a slipper spring on your aluminum or steel trailer's suspension. It is constructed of corrosion-resistant galvanized steel and accepts a 9/16" shackle bolt.

• Trailer Suspension Parts
• Hangers
• Camper
• Boat Trailer
• Snowmobile Trailer
• Car Hauler
• Utility Trailer
• Slipper Springs - 1-3/4 Inch
• 2-1/4 Inch Tall
• CE Smith

Your trailer's been through it all: salt spray, washboard roads, shifting hardware. These frame straps step in as quiet fixers, backing your U-bolts and keeping your setup steady from driveway to dock and every stop in between.

• Boat Trailer Parts
• Frame Straps
• 1 Inch Wide
• 4 Inch Long
• CE Smith

When you pull your trailer down a gravel road or pull out after a full day at the lake, this rear hanger will support every mile. It holds your 2" slipper spring, so bumps and potholes dont get the best of your cargo.

• Trailer Suspension Parts
• Hangers
• Camper
• Car Hauler
• Utility Trailer
• Slipper Springs - 2 Inch
• 1-1/4 Inch Tall
• CE Smith

Swap worn springs with this CE Smith 24-5/8" slipper leaf spring. Built to handle 250-lb loads, it's perfect for light-duty trailers. Features 1-leaf steel construction, 1-3/4" width, and eye-radius end for 1/2" shackle bolt fit.

• Trailer Suspension Parts
• Trailer Leaf Springs
• Slipper Springs
• 1/2 Inch Eye
• Bushing Not Included
• 500 lbs
• 1-3/4 Inch Wide
• 24-5/8 Inch Long
• Standard Grade
• CE Smith

• Trailer Fenders
• No Step
• 10 Inch Wheels
• 8 Inch Wheels
• 12 Inch Wheels
• 8-1/2 Inch Wide
• 23-3/4 Inch Long
• Steel
• For Single-Axle Trailers
• Gray
• CE Smith

• Trailer Fenders
• No Step
• 16 Inch Wheels
• 15 Inch Wheels
• 10 Inch Wide
• 72 Inch Long
• Steel
• For Tandem-Axle Trailers
• Gray
• CE Smith

• Trailer Suspension Parts
• Spring Seats
• Utility Trailer
• Camper
• Car Hauler
• 3500 lbs
• Square Axle - 2 Inch
• CE Smith

7-3/4" Long curved equalizer connects double-eye springs on tandem- or triple-axle trailers and allows for enough movement between the axles to keep the ride smooth and the load undisturbed. Galvanized, so it's perfect for your boat trailer!

• Trailer Suspension Parts
• Standard Equalizer
• Car Hauler
• Camper
• Snowmobile Trailer
• Boat Trailer
• Utility Trailer
• Double Eye Springs
• 7-3/4 Inch Long
• Triple Axle
• Tandem Axle
• CE Smith

Your trailer's been through it all: salt spray, washboard roads, shifting hardware. These frame straps step in as quiet fixers, backing your U-bolts and keeping your setup steady from driveway to dock and every stop in between.

• Boat Trailer Parts
• Frame Straps
• 1 Inch Wide
• 5 Inch Long
• CE Smith

Keep your trailer steady on the road. This front hanger attaches to your trailer's frame and holds a 1-3/8" wide slipper spring in place, so your suspension can absorb bumps and keep your cargo riding smooth.

• Trailer Suspension Parts
• Hangers
• Camper
• Snowmobile Trailer
• Boat Trailer
• Car Hauler
• Utility Trailer
• Slipper Springs - 1-3/4 Inch
• 2-3/8 Inch Tall
• CE Smith

Give your boat a smooth, steady slide on and off your trailer. This 12" polyurethane keel roller cushions and guides your hull, fits a 5/8" shaft, and helps prevent scuffs and scrapes at the ramp.

• Boat Trailer Parts
• Rollers
• Keel Roller
• 12 Inch Long
• Fits 5/8 Inch Shaft
• CE Smith

• Trailer Fenders
• No Step
• 14 Inch Wheels
• 9 Inch Wide
• 28 Inch Long
• Steel
• For Single-Axle Trailers
• Gray
• CE Smith

• Trailer Fenders
• No Step
• 15 Inch Wheels
• 14 Inch Wheels
• 9 Inch Wide
• 72 Inch Long
• Steel
• For Tandem-Axle Trailers
• Gray
• CE Smith

7" Wide x 20" long x 6" tall. Excellent for your boat trailer, this aluminum fender can stand up to rust, corrosion, and scratches. Easily bolt fender onto your trailer.

• Trailer Fenders
• No Step
• 8 Inch Wheels
• 10 Inch Wide
• 22 Inch Long
• Aluminum
• For Single-Axle Trailers
• Diamond Plate
• CE Smith

Add safe, slip-resistant footing to your trailer with this 24" x 9" CE Smith step pad. Fits any 2x3" or 3x3" trailer rail. Galvanized steel with textured surface. Mounting hardware included. Sold individually.

• Trailer Steps
• Step Pad
• 24 Inch Wide
• 9 Inch Deep
• Steel
• CE Smith

6" Long triangular equalizer connects double-eye springs on tandem- or triple-axle trailers and allows for enough movement between the axles to keep the ride smooth and the load undisturbed. Designed primarily for RVs and mobile homes.

• Trailer Suspension Parts
• Standard Equalizer
• Boat Trailer
• Camper
• Snowmobile Trailer
• Car Hauler
• Utility Trailer
• Double Eye Springs
• 6 Inch Long
• Tandem Axle
• Triple Axle
• CE Smith

• Trailer Suspension Parts
• Spring Seats
• Camper
• Car Hauler
• Utility Trailer
• 3500 lbs
• Round Axle - 2-3/8 Inch
• CE Smith

When you're easing your boat back onto the trailer after a long day, this keel roller makes it simple. Grooves help center your boat, while the tough polyurethane cushions the hull and keeps your boat scratch-free trip after trip.

• Boat Trailer Parts
• Rollers
• Keel Roller
• 2-13/16 Inch Diameter
• 11-3/8 Inch Long
• Fits 5/8 Inch Shaft
• CE Smith

You were ready to launch, but the roller locked up. This shaft steps in when rust, bends, or wear bring things to a stop. It restores the spin, the glide, and the confidence to get back on the water like nothing ever went wrong.

• Boat Trailer Parts
• Rollers
• Roller Shafts
• 5/8 Inch Diameter
• 11 Inch Long
• CE Smith

Replacement CE Smith spindle welds onto your trailer axle.

• Trailer Spindles
• Standard Spindle
• 1-3/8 Inch Diameter
• CE Smith