Some air chucks leak or pop off unless you hold them in place. This one pushes on and locks down so you can let go while the tire inflates. The internal shut-off keeps air in the system when it's not connected to a valve.
Control your vehicle's lights, air compressor, batteries, air lockers, and more, all from your phone or the 8-switch panel. Bluetooth-enabled control box mounts under the hood and powers switch panel via the included wiring harness.
Some valve stems are buried deep or sit at the wrong angle for a standard chuck. This dual-head chuck with a flexible hose gives you the reach and angle you need to push the chuck onto the valve and fill the tire, even in tight spots.
Make it easier to reach your winch control plug with a 3' extension cord. Lets you plug in your wired controller even if your winch is mounted in a hard to reach location.
You've got a compressor mounted in your truck or set up in the shop, so you're not about to move it. This hose lets you air up tires or run pneumatic tools up to 30 feet away. Works with most compressors using 1/4" connections.
Repairs the latching mechanism in your BedSlide truck bed slide. Works with all BedSlides made between 2010 and 2013. Kit includes 2 lock pins, 2 springs, 2 hairpin clips, and instructions.
The sun is blazing, but your battery isn't. This solar panel lets you harness the sun to recharge your CS Free, keeping your battery and devices powered so you're never stranded off-grid. Just unfold the panel, position it, and power up.
You toss your charger on the fender, lean in to check connections, hear it slide, and hit the ground. This case keeps your charger secure with a durable, non-slip silicone shield, protecting it and your vehicle from scratches. No more slips or drops.
You go to charge your battery only to realize your charger won't reach. This extension cable gives you an extra 8' of flexibility, so you can position your charger where it works best. No more stretching cables or parking at odd angles.
You're off-grid, miles from the nearest outlet, and your vehicle's battery needs a charge. These clamps let you power your CS Free directly from a 12V service battery, so you're never stranded. Just clamp, plug in, and charge anywhere.
You're ready to ride, but is your battery? This eyelet cable gives you an instant read on your battery's health with a simple LED system. A quick glance tells you if it's good to go or needs a charge - before you're stuck.
Your CS Free is built for portability, but when you're home, you need a safe spot for it. This mount keeps your charger secure in your garage. Mount it permanently or hang it temporarily - either way, your charger is ready when you need it.
Your charger is an essential tool, but where do you put it when you're working? This wall mount keeps your charger secure and within reach, whether mounted to a wall or hung on a vehicle door. It's just a smarter way to store your charger.
Your battery is out of sight, and now it's out of power. The indicator pigtail converts your SAE quick connector into a real-time battery monitor, so you always know when it's time to charge. The LEDs let you check your battery at a glance.
You're on the road, miles from an outlet, and your CS Free charger is running low. The 12V plug lets you recharge directly from your vehicle's 12V socket, so your charger is always ready when you need it. Just plug in and power up - anywhere.
Your battery doesn't give warnings until it's too late. This indicator plug gives you an instant read on your battery's health through your 12V socket, so you always know when it's time to charge. No tools, no hassle.
Your charger keeps your battery ready, but where do you keep your charger? The mounting bracket gives your charger a dedicated home, keeping it secure, off the floor, and always within reach. No more tangled cables or misplaced chargers.
You toss your charger on the fender, lean in to check connections, hear it slide, and hit the ground. This case keeps your charger secure with a durable, non-slip silicone shield, protecting it and your vehicle from scratches. No more slips or drops.
You toss your charger on the fender, lean in to check connections, hear it slide, and hit the ground. This case keeps your charger secure with a durable, non-slip silicone shield, protecting it and your vehicle from scratches. No more slips or drops.
You toss your charger on the fender, lean in to check connections, hear it slide, and hit the ground. This case keeps your charger secure with a durable, non-slip silicone shield, protecting it and your vehicle from scratches. No more slips or drops.
In a busy workshop, efficiency is key. The Trolley Pro keeps your chargers, laptops, and testing equipment organized and mobile, so you can move seamlessly between tasks without missing a beat. Make sure your essential tools are always within reach.
You invested in the CS Free to keep you powered up - now protect it. This case keeps your charger safe and organized. With a water-resistant design and padded interior, it ensures your charger and accessories stay secure wherever the road takes you.
Need an air distribution box for your ductless Furrion Chill Cube RV AC setup? This low-profile unit includes a remote control that can sense and adjust the temperature of the area in your RV that the remote is in.