New Arrivals

Not running a winch? This fairlead cover panel bolts into place on your ARB Summit bumper to clean up the opening - protecting the fairlead mount and giving your bumper a finished, factory look.

• Accessories and Parts
• Bumper
• Winch Fairlead
• ARB

Protect your suspension with the custom-fit FK13 Anti-Inversion Kit for Old Man Emu leaf springs. Featuring a bolt-on design, this kit prevents leaf spring inversion and ensures reliable performance during off-road adventures.

• Accessories and Parts
• Vehicle Suspension
• Leaf Springs
• Anti-Inversion Kit
• Old Man Emu

Confidently install your Old Man Emu leaf springs with the OMESB99 bushing kit. Includes 6 bushings and 1 metal sleeve for use with OE shackles. Compatible with CS016R, CS150R, and CS151R leaf springs. Each spring pack requires one bushing kit.

• Accessories and Parts
• Vehicle Suspension
• Leaf Springs
• Bushings
• Old Man Emu

Noticed your ride sitting uneven? A strut trim packer fine-tunes height to fix side-to-side lean or front-to-back rake. It offsets added weight from accessories and installs easily for a subtle but effective fix restoring balance and control.

• Accessories and Parts
• Vehicle Suspension
• Spacers
• Trim Packer
• Old Man Emu

Replaces a flood beam light pod for your ARB V2 AR21 light or V2 AR21 light kit. 7" Round pod built for off-road driving in extreme conditions. Has universal pedestal mount and security hardware. 13" long, 2-pin DPT connector.

• Accessories and Parts
• Off Road Lights
• Vehicle Lights
• Pod Light
• ARB

Got lights but no good place to mount them? This ARB light bracket clamp gives you a solid, secure way to mount 35 mm round lamps to your ARB bumper, no guesswork.

• Accessories and Parts
• Bumper
• Mounting Hardware
• Light Mounting Brackets
• ARB

Use this helper spring spacer kit when adding a helper spring to your Old Man Emu leaf spring pack. Includes a 70mm x 1.3 mm spacer and HDPE liners to reduce friction, prevent hotspots, and ensure proper spacing for smooth and durable performance.

• Accessories and Parts
• Vehicle Suspension
• Leaf Springs
• Spacers
• Helper Spring Spacer
• Old Man Emu

Replaces the wind deflector on your ARB Base platform rack. Work with Base rack 1770020 using mounting kit 17921030. Includes mounting hardware.

• Accessories and Parts
• Roof Rack
• Deflectors
• ARB

Replaces the wiring harness used with ARB Solis-series pod lights. Works with Solis 21 or Solis 36 lights. Equipped for 2 lights. Uses 4-pin AT connector.

• Accessories and Parts
• Vehicle Lights
• Off Road Lights
• Wiring Harness
• ARB

Worn bushings cause clunking, poor handling, and alignment issues. If your suspension feels loose or noisy, replacing your bushings may bring back control, comfort, and confidence - without replacing major components.

• Accessories and Parts
• Anti-Sway Bars
• Anti-Sway Bar Parts
• Bushings
• Old Man Emu

Synthetic rope can be used to replace an existing rope, or serve as a upgrade on some winches. Synthetics generate less kinetic energy than steel, protecting you and your equipment if a break occurs. Includes stainless steel tube thimble.

• Accessories and Parts
• Electric Winch
• Ropes
• 1/4 Inch Diameter
• Synthetic Rope
• Erickson

Keep your Empire Faucets hybrid RV kitchen faucet (SL1000-A) working like new with this replacement cartridge. Designed for a precise fit, it restores smooth water flow and reliable performance, so you can enjoy hassle-free use on the road.

• Accessories and Parts
• RV Faucets
• Cartridge
• Empire Faucets

Confidently install your Old Man Emu leaf springs with the OMESB118 bushing kit. Includes 6 bushings and 1 metal sleeve for use with OMEGS20 greaseable shackles. Works with EL120R and EL121R leaf springs. Each spring pack requires one bushing kit.

• Accessories and Parts
• Vehicle Suspension
• Leaf Springs
• Bushings
• Old Man Emu

Cinch strap with an S-hook and closed webbing loop set-up secures two ramps to your vehicle while loading or unloading. Keeps your ramps in position despite shifting load weight distribution during use. Rated for 750-lb maximum load.

• Accessories and Parts
• ATV Ramps
• Trailer Ramps
• Car Ramps
• Truck Ramps
• Straps
• Erickson

Synthetic rope can be used replace an existing rope, or serve as a upgrade on some winches. The synthetic generates less kinetic energy than steel, protecting you and your equipment if a break occurs. Soft shackle end for versatile pull options.

• Accessories and Parts
• Electric Winch
• Ropes
• 3/8 Inch Diameter
• Synthetic Rope
• Erickson

This breakaway switch sounds an alarm when the pin is pulled, so you know it's working. Wire it into your trailer's brake system so if your trailer becomes uncoupled it will activate the trailer brakes, giving you time to move to safety.

• Accessories and Parts
• Trailer Breakaway Kit
• Switches
• ESCO

Keep your trailer plug off the ground and out of the dirt with this holder. Secures to your trailer and gives you a spot to clip your breakaway cable when it's not in use. Fits 7-way plug.

• Accessories and Parts
• Trailer Wiring
• Wiring
• Custom Fit Vehicle Wiring
• Plug Holder
• ESCO

Replaces the 3/8" x 2-1/8" pin for your Lippert Solera RV awning. Dacromet finish provides corrosion resistance.

• Accessories and Parts
• RV Awnings
• Hardware
• Pins
• Lippert

Replace your RV's old or damaged awning roller and fabric with this heavy-duty assembly. Fits Edge and 2000 series 8' power awnings with a built-in LED strip. Installs more easily than replacing just the fabric.

• Accessories and Parts
• RV Awnings
• Fabric
• 8 Feet Wide
• Extends 7 Feet
• Black Fade
• Lippert

Replaces the OneControl Advantage controller with Bluetooth for your Lippert Level Up RV leveling system. Fits all Lippert Level Up leveling systems. Includes flat mounting brackets and hardware.

• Accessories and Parts
• Camper Jacks
• Controllers
• Control Module
• Lippert

Restore push-button power to your Solera awning with this replacement arm kit featuring matching 69 inch Regal arms, flat-back mounts, top-routed wiring, and a black 12-volt rocker switch - just swap the arms and keep your current fabric and roller.

• Accessories and Parts
• RV Awnings
• Arms
• 69 Inch Long
• Pitch Arms
• Flat Awnings
• Black
• Lippert

Replaces the auto-leveling control box for your Lippert Power Gear hydraulic RV leveling system.

• Accessories and Parts
• Trailer Jack
• Control Panel
• Lippert

A damaged harness can make your RV's leveling system unreliable. This 25' replacement restores electrical connections, helping your jacks work smoothly. Designed for Lippert Level-Up systems, it's a simple fix to get you back to camping.

• Accessories and Parts
• Camper Jacks
• Trailer Jack
• Wiring Harness
• Lippert

Restore your Solera Edge slide-out awning with this full idler side replacement kit. Designed for all Solera Edge toppers, it includes black-finished hardware and wire support components for a secure, like-new installation.

• Accessories and Parts
• RV Awning
• Hardware
• Lippert