Mount your pintle hitch to a plate with these 4-1/2" x 2" Grade 8 cap screws, nuts, and heavy-duty lock washers. Designed for use with Brophy pintle mounts.
Quickly and easily connect your safety chain to your trailer hitch. Durable, zinc-coated, Grade 80 steel construction. Hammerlock coupling link works with 3/8" chains. 7,000-lb Load limit.
When you bleed pressure just to swap tools or close a line, you lose time waiting for your compressor to recover. This in-line valve lets you shut things off with a quarter turn and hold pressure in the system so you can keep working.
Control your vehicle's lights, air compressor, batteries, air lockers, and more, all from a single 8-switch panel. Control box mounts under the hood and powers switch panel via the included wiring harness.
Some valve stems are tucked behind a fender or sit at a weird angle. This short, flexible hose gives you a little slack at the valve so you can connect the chuck without bending the main line or working at an awkward angle.
Some air chucks leak or pop off unless you hold them in place. This one pushes on and locks down so you can let go while the tire inflates. The internal shut-off keeps air in the system when it's not connected to a valve.
Control your vehicle's lights, air compressor, batteries, air lockers, and more, all from your phone or the 8-switch panel. Bluetooth-enabled control box mounts under the hood and powers switch panel via the included wiring harness.
Some valve stems are buried deep or sit at the wrong angle for a standard chuck. This dual-head chuck with a flexible hose gives you the reach and angle you need to push the chuck onto the valve and fill the tire, even in tight spots.
Make it easier to reach your winch control plug with a 3' extension cord. Lets you plug in your wired controller even if your winch is mounted in a hard to reach location.
You've got a compressor mounted in your truck or set up in the shop, so you're not about to move it. This hose lets you air up tires or run pneumatic tools up to 30 feet away. Works with most compressors using 1/4" connections.
Repairs the latching mechanism in your BedSlide truck bed slide. Works with all BedSlides made between 2010 and 2013. Kit includes 2 lock pins, 2 springs, 2 hairpin clips, and instructions.
From trail to tailgate, these color-changing, solar string lights set the mood and keep the party lit. Shatterproof bulbs, tough-as-trails design, and a built-in power bank make them adventure-ready. They also store easily when the party's over.
From trail to tailgate, these warm white solar string lights set the mood and keep the party lit. The shatterproof bulbs, tough-as-trails design, and a built-in power bank make them adventure-ready. They also store easily when the party's over.
Maintain the charge of your towed car's battery from your coach or tow vehicle with this simple harness. 12V Power line with in-line charger connects to the 6-way or 7-way plug on your vehicle. Troubleshoot with the simple LED indicator.
Replace the black rubber sleeves on your Blue Ox Alpha 2 (BX7380), Avail (BX7420), Ascent (BX4375, BX4370), or Apollo (BX7475) tow bar to keep dirt and debris out of the tow bar's telescoping arms. Includes 2 sleeves, 2 nuts, and 4 zip-ties.
If you need to disconnect the battery to flat tow your vehicle, you're going to want this kit. It disconnects your battery with the turn of a knob - much safer and faster than doing it yourself - while keeping your towing accessories charged.
Shank measures 12" long from the center of the hitch pin hole to the center of the adjustment holes. 7 Bolt holes let you adjust the height of your Blue Ox TrackPro weight distribution system. Fits 2" receivers. 850 lb tongue weight.
Mount your Blue Ox SwayPro weight distribution system with this heavy-duty shank. Designed for 2" hitches, this steel shank installs in either the rise or drop position and handles up to 15,000 lbs of trailer weight.