bing tracking image

New Arrivals

Filters

Redarc Tow-Pro Elite Control Knob Wiring Harness - 6-1/2' Long

Our Price: $15.95
In Stock
6-1/2' Long cable connects your Redarc Tow-Pro Elite brake controller's control knob to the main unit. Automotive-grade harness is durable.
  • Accessories and Parts
  • Trailer Brake Controller
  • Wiring Harness
  • Redarc

Redarc BCDC Alpha 50A Mid-Vehicle Wiring Kit

Retail: $280.50
Our Price: $255.00
Got a mid-vehicle battery setup? A seamless installation means less time in the garage and more time on the trails. This kit has pre-crimped cables, fuses, and connectors for batteries up to 14'9" apart. Made for the Redarc BCDC Alpha 50A.
  • Accessories and Parts
  • Battery Charger
  • Battery Charger Install Kit
  • Redarc

Redarc Anderson to Bare Cable Adapter - 5

Retail: $29.28
Our Price: $26.51
In Stock
Multipurpose cable lets you wire a solar panel with Anderson connectors to a solar charge controller with hardwire inputs. Also can be used for adding extra cable length to solar panels, or connecting to chargers or battery management systems.
  • Accessories and Parts
  • Solar Charge Controllers
  • Cables and Connectors
  • Adapters
  • Redarc

RV Battery Tray for Redarc Alpha150 Lithium Battery - Steel

Our Price: $145.00
In Stock
This custom battery tray mounts to the floor of your RV or camper to keep your Alpha150 battery securely locked in place during travel. Quick and simple installation with countersunk fasteners.
  • Accessories and Parts
  • Battery Boxes
  • Battery Trays
  • Redarc

Redarc BCDC Alpha 25A Mid-Vehicle Wiring Kit

Retail: $247.50
Our Price: $225.00
Got a mid-vehicle battery setup? A seamless installation means less time in the garage and more time on the trails. This kit has pre-crimped cables, fuses, and connectors for batteries up to 14'9" apart. Made for the Redarc BCDC Alpha 25A.
  • Accessories and Parts
  • Battery Charger
  • Battery Charger Install Kit
  • Redarc

Redarc PowerDock Wiring Kit for Terminal Block Installation

Retail: $184.00
Our Price: $167.00
In Stock
Need to get your PowerDock wired up for your next adventure? This kit makes it easy with color-coded cables, tough hardware, and room to customize. It's built for rough trails, so you can get set up and get going in no time!
  • Accessories and Parts
  • Portable Chargers
  • Cables and Cords
  • Redarc

Redarc Solar Panel Side Mounts - Qty 2

Retail: $93.50
Our Price: $85.00
In Stock
Side mounts work with corner mounts (RED79VR - sold separately) to attach single or multiple Redarc solar panels to an RV or boat. Attach mount to surface using a silicon adhesive or common fasteners.
  • Accessories and Parts
  • RV Solar Panels
  • Mounting Hardware
  • Redarc

Redarc BCDC Alpha 25A Rear-Vehicle Install Wiring Kit

Retail: $269.50
Our Price: $245.00
Got a rear-vehicle setup? A seamless installation means less time in the garage and more time on the trails. This kit has pre-crimped cables, fuses, and connectors for batteries up to 21"4" apart. Made for the Redarc BCDC Alpha 25A.
  • Accessories and Parts
  • Battery Charger
  • Battery Charger Install Kit
  • Redarc

Complete Installation Kit for Redarc PowerDock Docking Station

Retail: $389.00
Our Price: $352.00
In Stock
Beach, campsite, or worksite - take your adventures off-grid! This all-in-one kit makes connecting your PowerDock a cinch. Hook up solar panels, power up anywhere, and rely on rugged Aussie durability to tackle the wild.
  • Accessories and Parts
  • Portable Chargers
  • Cables and Cords
  • Redarc

Redarc BCDC Alpha 50A Side-by-Side Engine Bay Wiring Kit

Retail: $236.50
Our Price: $215.00
Got batteries close together? This kit has pre-crimped cables, fuses, and connectors for batteries less than 5' apart. Made for the Redarc BCDC Alpha 50A.
  • Accessories and Parts
  • Battery Charger
  • Battery Charger Install Kit
  • Redarc

Backing Plate for Single Axle Trailer Fender - 32" Long x 12" Tall - Qty 2

Our Price: $549.99
Replace 2 worn or damaged backing plates on your single-axle trailer fender. Backing easily blocks water and road debris from hitting the side of your trailer.
  • Accessories and Parts
  • Trailer Fenders
  • Fender Back
  • CE Smith

CE Smith Trailer Coupler Latch Replacement - 2" Ball - 3,500 lbs and 5,000 lbs

Retail: $19.99
Our Price: $17.50
In Stock
Coupler repair kit contains all needed replacement parts for your CE Smith straight-tongue coupler with a 3,500-lb or 5,000-lb capacity, except for the coupler housing.
  • Accessories and Parts
  • Straight Tongue Trailer Coupler
  • Coupler Repair
  • CE Smith

CE Smith Tail Light Bracket - Aluminum - 10" Wide - Right Hand Side

Our Price: $15.99
In Stock
Rustproof, durable aluminum bracket lets you mount a tail light to your trailer frame.
  • Accessories and Parts
  • Trailer Lights
  • Mounting Hardware
  • Brackets
  • CE Smith

CE Smith Spindle Nuts, Washers, and Cotter Pins for 1" Axle - Qty 2

Our Price: $10.82
In Stock
Replace the spindle nuts, washers, and cotter pins on your axle shaft with this kit from CE Smith.
  • Accessories and Parts
  • Trailer Suspension Parts
  • Trailer Axles
  • Hardware
  • Nuts
  • CE Smith

CE Smith Single Axle Trailer Fender Mounting Brackets for 1 Fender

Retail: $65.99
Our Price: $61.03
In Stock
These brackets let you mount your single-axle fenders with side steps to your trailer. Includes 2 bolt-on, galvanized brackets to mount one fender. Works with CE19502, CE19503, CE19504 fenders (sold separately).
  • Accessories and Parts
  • Trailer Fenders
  • Mounting Hardware
  • Brackets
  • CE Smith

Replacement 90-Degree Post for CE Smith Boat Trailer Guide-Ons - Qty 1

Our Price: $51.71
Replaces the 90-degree post for your CE Smith post-style boat trailer guide-ons (27635, 27637, or 27638).
  • Accessories and Parts
  • Boat Trailer Parts
  • Guide-On Parts
  • Posts
  • CE Smith

CE Smith Safety Travel Flag with Nylon Webbing

Our Price: $15.72
In Stock
This towing safety flag is ideal for your kayak, SUP, or anything else you want to tow and draw attention to. Made of Oxford fabric and nylon webbing, so it holds up for the long haul.
  • Accessories and Parts
  • Trailers
  • Watersport Carriers
  • Sports Trailer Parts
  • Watersport Trailer Parts
  • Safety Flag
  • CE Smith

CE Smith Tail Light Bracket - Aluminum - 10" Wide - Left Hand Side

Our Price: $16.99
In Stock
Rustproof, durable aluminum bracket lets you mount a tail light to your trailer frame.
  • Accessories and Parts
  • Trailer Lights
  • Mounting Hardware
  • Brackets
  • CE Smith

CE Smith Tail Light Bracket - Aluminum - 10" Wide - Right Hand Side

Our Price: $17.49
In Stock
Rustproof, durable aluminum bracket lets you mount a tail light to your trailer frame.
  • Accessories and Parts
  • Trailer Lights
  • Mounting Hardware
  • Brackets
  • CE Smith

CE Smith Adjustable Vertical Bunk Hold Bracket for V-Brace Bracket

Retail: $29.05
Our Price: $22.15
This rust-resistant bracket lets you mount a bunk board vertically on your boat trailer. It's adjustable, so if you need to move your bunk up or down, just loosen the bolts a little and adjust as needed.
  • Accessories and Parts
  • Boat Trailer Parts
  • Brackets
  • Bunk Bracket
  • CE Smith

CE Smith Tail Light Bracket - Aluminum - 10" Wide - Left Hand Side

Retail: $11.49
Our Price: $10.74
In Stock
Rustproof, durable aluminum bracket lets you mount a tail light to your trailer frame.
  • Accessories and Parts
  • Trailer Lights
  • Mounting Hardware
  • Brackets
  • CE Smith

Backing Plate for Single Axle Trailer Fender - 32" Long x 12" Tall

Our Price: $21.89
Replace 1 worn or damaged backing plate on your single-axle trailer fender. Backing easily blocks water and road debris from hitting the side of your trailer.
  • Accessories and Parts
  • Trailer Fenders
  • Fender Back
  • CE Smith

Replacement Spring Bar for Curt TruTrack 4P Weight Distribution System

Retail: $82.95
Our Price: $70.23
Replaces the spring bar for your Curt TruTrack 4P trailer-mounted weight distribution system (17520).
  • Accessories and Parts
  • Weight Distribution Hitch
  • Spring Bars
  • Square Bar
  • CURT

Curt Custom Wiring Adapter for Trailer Brake Controllers - Dual Plug In

Our Price: $16.49
In Stock
Install your Curt electric trailer brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your controller and then plug the other end into the built-in port beneath your vehicle's dash.
  • Accessories and Parts
  • Trailer Brake Controller
  • Wiring Adapter
  • Plugs into Brake Controller
  • Vehicle Specific
  • CURT